Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/3/2004 7:22:14 AM EDT
Hello everyone. I have had my Aimpoint Comp ML2 and the Larue single ring mount for the optic for about 3 months now. I would say I have taken the mount off about 150 times during that period. Not really alot. Its mounted to a Bushmaster M4. I have noticed that each time I go to the range with it, the scope is off by a few inches at 25 yards. I usually shoot from a sandbag rest, but even with the rest the shots are off a few inches. Now I know I can adjust the scope each time, but it really sucks because thats why I went with the Aimpoint instead of the TacPoint and the LaRue instead of some cheaper mount. Could it be the fact that I didn't put locktite on the screw? Or maybye I am just not supposed to be taking the mount off of the gun? Thanks for your time.
Link Posted: 10/3/2004 7:50:16 AM EDT
Where does your zero wander?



Link Posted: 10/3/2004 7:57:41 AM EDT
Link Posted: 10/3/2004 8:21:13 AM EDT
Duke, the last time I went shooting the POI was up and to the left by about 1.5 inches.
Link Posted: 10/3/2004 9:17:36 AM EDT
Link Posted: 10/3/2004 9:42:05 AM EDT

Originally Posted By new-arguy:
Thats taking the mount off close to twice a day every day for three months. Not that I think this is the problem... but that is actually quite a bit.


Link Posted: 10/3/2004 10:11:17 AM EDT
[Last Edit: 10/3/2004 10:15:24 AM EDT by Death_006]
Ok, guys I found a slight (I mean SLIGHT) bit of play between the aimpoint and mount. I remember having to reinstall the sight when i first got it, so I think I just didnt tighten it enough. I'm tightening it up and going to the range right now.
Link Posted: 10/3/2004 10:18:23 AM EDT
Link Posted: 10/3/2004 3:12:37 PM EDT
150 times is a HELL of a lot!
Link Posted: 10/3/2004 3:23:16 PM EDT
Link Posted: 10/3/2004 7:10:13 PM EDT
Link Posted: 10/4/2004 12:44:18 AM EDT
It's good now, was hitting high, got that fixed.
Link Posted: 10/4/2004 4:17:12 AM EDT
Top Top