Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Arrow Left Previous Page
Page / 2
Posted: 11/12/2012 4:11:50 PM EST
New logo and now a website!

Aero Precision USA
Link Posted: 11/12/2012 4:18:30 PM EST
[Last Edit: 11/12/2012 4:18:59 PM EST by PFran42]
Link Posted: 11/12/2012 4:27:38 PM EST
I think they are quite possibly the most underrated company in the industry.
Link Posted: 11/12/2012 4:31:34 PM EST
I am digging the new roll mark and think their product branded under SAA is an excellent product, I am going to get their stripped upper for my current build.
Link Posted: 11/12/2012 4:39:58 PM EST
I like that new roll mark, it's simple and clean.
Link Posted: 11/12/2012 4:48:14 PM EST
[Last Edit: 11/12/2012 4:49:14 PM EST by floater33]
Mono upper looks interesting.
ETA: I agree with you evlblk, excellent products.
Link Posted: 11/12/2012 4:54:11 PM EST
+1 on the mono receiver.
Link Posted: 11/12/2012 5:11:53 PM EST
Their new scope mount while not high end - might be useful for a rifle or two. Too bad I did not see a price for that hardware, nor a stocking retail outlet.
Link Posted: 11/12/2012 5:21:10 PM EST
[Last Edit: 11/12/2012 5:21:44 PM EST by BlackRifleRecon]
Originally Posted By bradbn4:
Their new scope mount while not high end - might be useful for a rifle or two. Too bad I did not see a price for that hardware, nor a stocking retail outlet.


Curious, If it's not out yet how can you tell its not "high-end"? Judging on all of their past and present products I think its fair to say nothing they put out is cheap. I personally am not the biggest fan of it cause I love the QD options already available but I'm not going to short change em without going hands on.

Link Posted: 11/12/2012 5:21:48 PM EST
[Last Edit: 11/12/2012 5:22:26 PM EST by Gamma762]
I really liked their old logo, the new one, not

And been waiting a long time for a rifle length (or longer) upper that has never materialized.
Link Posted: 11/12/2012 5:25:12 PM EST
I ordered two Aero Precision Complete Lowers (No Stocks) from Surplus Ammo & Arms - Should have them soon - was before the really awful news on a recent night... (cough cough) - Will advise on the impression these make. I'm new to the AR and building them but have been learning a lot and noticing all kinds of things with different parts.
Link Posted: 11/12/2012 5:33:08 PM EST
I'm with you on a rifle length!!! I'll be swapping out the middy for one. But I do like the new logo. simple and clean. Looks like I'll be swapping out the old lower soon.

Link Posted: 11/12/2012 5:36:03 PM EST
Originally Posted By PFran42:
Great high-tech video too!

http://www.youtube.com/watch?feature=player_embedded&v=xQw50w_JWzk


FAP
Link Posted: 11/12/2012 5:38:32 PM EST
Uploaded with ImageShack.us" />

Uploaded with ImageShack.us" />
Link Posted: 11/12/2012 5:40:09 PM EST
Originally Posted By Gamma762:
I really liked their old logo, the new one, not


Agreed.
Link Posted: 11/12/2012 5:43:10 PM EST
Originally Posted By Gamma762:
I really liked their old logo, the new one, not

And been waiting a long time for a rifle length (or longer) upper that has never materialized.

The mids didn't sell well enough to justify pressing forward on a rifle length.

Link Posted: 11/12/2012 5:45:18 PM EST
The Avengers!

Well, kinda........
Link Posted: 11/12/2012 5:57:04 PM EST
New rollmark looks pretty good, but not a fan of how they felt the need to put it on both sides of the receiver
Link Posted: 11/12/2012 6:16:02 PM EST

btm7687

New rollmark looks pretty good, but not a fan of how they felt the need to put it on both sides of the receiver


I agree that bugs me a little but I will probably get one soon
Link Posted: 11/12/2012 8:06:26 PM EST
[Last Edit: 11/12/2012 10:27:38 PM EST by Gamma762]
Originally Posted By evlblkwpnz:
Originally Posted By Gamma762:
I really liked their old logo, the new one, not
And been waiting a long time for a rifle length (or longer) upper that has never materialized.

The mids didn't sell well enough to justify pressing forward on a rifle length.

There's more demand for rifle length or longer than mid, probably mid and carbine put together.
Link Posted: 11/12/2012 8:37:52 PM EST
[Last Edit: 11/12/2012 8:40:24 PM EST by olds442tyguy]
Originally Posted By evlblkwpnz:
Originally Posted By Gamma762:
I really liked their old logo, the new one, not

And been waiting a long time for a rifle length (or longer) upper that has never materialized.

The mids didn't sell well enough to justify pressing forward on a rifle length.



Vltor and LMT sell the most of the rifle length monos. Larue isn't available in anything but rifle length.

The ONLY reason I went with a pieced together upper on my last build was because Aero doesn't offer a rifle length.

Most people who want a mono upper don't intend to use a front sight base, but the two models they do have are standard FSB carbine barrel lengths. Bad idea.
Link Posted: 11/12/2012 9:21:05 PM EST

Blue state...no go
Link Posted: 11/12/2012 9:22:09 PM EST
Originally Posted By olds442tyguy:
Most people who want a mono upper don't intend to use a front sight base

Exactly.
Link Posted: 11/12/2012 9:38:30 PM EST
Link Posted: 11/12/2012 10:51:38 PM EST
[Last Edit: 11/12/2012 10:53:12 PM EST by DanNH]
Their new stripped upper doesn't have the American flag on it anymore.

ETA: It says it does in the description, but the pic shows just their new logo.
Link Posted: 11/13/2012 1:23:54 AM EST
[Last Edit: 11/13/2012 5:12:38 PM EST by IHC53]
The new logo looks like ass. Smaller, more simple logos are the way to go.

Edit:

Come to think of it, the now "old" logo is reminiscent of Rockwell International .


Link Posted: 11/13/2012 1:56:12 AM EST
Originally Posted By Shooter62:

Blue state...no go


Wow...
I guess it's no longer buy American.
Link Posted: 11/13/2012 2:14:44 AM EST
[Last Edit: 11/13/2012 2:18:23 AM EST by MSPRet]
I'm also not liking the new logo, it's a bit odd. And what did happen to the Flag? Another thing we lost with the election perhaps?....<><....:(
Link Posted: 11/13/2012 4:04:08 PM EST
Originally Posted By BlackRifleRecon:
Originally Posted By bradbn4:
Their new scope mount while not high end - might be useful for a rifle or two. Too bad I did not see a price for that hardware, nor a stocking retail outlet.


Curious, If it's not out yet how can you tell its not "high-end"? Judging on all of their past and present products I think its fair to say nothing they put out is cheap. I personally am not the biggest fan of it cause I love the QD options already available but I'm not going to short change em without going hands on.



I have 3 rules of thumb for not being considered "high end"
1) not quick detach
2) only in 1" format
3) It don't say LaRue on the side - ok, that's not an reason, but I said not high end don't mean the same as cheap in my book. There are a few good valued mounts from LaRue - but those I would not consider as cheap. Also I can say the same for weaver.

Now a Lotus car I would consider high end - and great performer. However; poor value for the job I want it to perform. I am looking for more of a GMC truck versus the Lotus Elise in scope mounts.




Link Posted: 11/13/2012 4:12:40 PM EST
Originally Posted By 762minigun2:
Originally Posted By Gamma762:
I really liked their old logo, the new one, not


Agreed.


+1

Going to have to look for an older one now!
Link Posted: 11/13/2012 4:35:58 PM EST
New logo sucks balls. That is all.
Link Posted: 11/13/2012 5:03:15 PM EST
[Last Edit: 11/13/2012 5:04:31 PM EST by tedness]
Do they really need a rollmark on both sides?

Originally Posted By Shooter62:

Blue state...no go


Are you serious? United we stand, but only if you're red?
Link Posted: 11/13/2012 5:13:11 PM EST
I have two lowers. One drops PMAGs, the other doesn't. This might not be an issue for some, but for someone who has largely standardized on PMAGs, it's a deal killer for me.
Link Posted: 11/14/2012 4:11:10 PM EST
Originally Posted By Gastonite:
I have two lowers. One drops PMAGs, the other doesn't. This might not be an issue for some, but for someone who has largely standardized on PMAGs, it's a deal killer for me.


If its strickly a lower issue. contact them and get a different one
Link Posted: 11/14/2012 6:00:17 PM EST
That one piece upper looks all space-lasery. I like it!
Link Posted: 11/14/2012 6:20:05 PM EST
I like the new logo but don't care for it on the other side. I would like the logo better if they put their name right below too, or incorporated it using the "A".
Link Posted: 11/14/2012 6:48:59 PM EST
Always liked the logo. Would buy a rifle length monolithic upper.
Link Posted: 11/14/2012 6:59:52 PM EST
It doesnt matter if there in a blue state as long as they have red state values...yankeehill,Smith &Wesson,Auto ordnance all in a blue state and very pro gun.
Link Posted: 11/14/2012 9:58:27 PM EST
[Last Edit: 11/14/2012 10:00:14 PM EST by JL_2112]
Originally Posted By pun:
It doesnt matter if there in a blue state as long as they have red state values...yankeehill,Smith &Wesson,Auto ordnance all in a blue state and very pro gun.


Colt, BCM, Magpul, Remington, Noveske....

edit: Almost forgot Spike's Tactical
Link Posted: 11/15/2012 1:26:18 AM EST
Originally Posted By JL_2112:
Originally Posted By pun:
It doesnt matter if there in a blue state as long as they have red state values...yankeehill,Smith &Wesson,Auto ordnance all in a blue state and very pro gun.


Colt, BCM, Magpul, Remington, Noveske....

edit: Almost forgot Spike's Tactical


Oh shit forgot about Fla. Throw Knights into that ring as well then! Also Windham Weaponry, from MAine––-man guess that leaves me pretty much buying Larue from here on out
Link Posted: 11/15/2012 2:30:46 AM EST
My first build ever was using an Aero lower. I like the new logo, but not enough to justify replacing what I have. My second build i am working on I am using a PSA lower. IMHO, the PSA rollmark is the best in the industry. Reminds me of an army logo. The ball and cannons are very cool. Of course, if the lower doesn't perform or fit, nothing really matters, and both are built well. Glad to see Aero gaining popularity.
Link Posted: 11/15/2012 3:39:35 AM EST
Originally Posted By JL_2112:
Originally Posted By pun:
It doesnt matter if there in a blue state as long as they have red state values...yankeehill,Smith &Wesson,Auto ordnance all in a blue state and very pro gun.


Colt, BCM, Magpul, Remington, Noveske....

edit: Almost forgot Spike's Tactical


Include RRA, LMT, Armalite, and Les Baer. Doesn't leave much.
Link Posted: 11/15/2012 10:41:06 AM EST
[Last Edit: 11/16/2012 8:41:29 PM EST by Gamma762]
Originally Posted By cagusmc:
Originally Posted By JL_2112:
Originally Posted By pun:
It doesnt matter if there in a blue state as long as they have red state values...yankeehill,Smith &Wesson,Auto ordnance all in a blue state and very pro gun.

Colt, BCM, Magpul, Remington, Noveske....
edit: Almost forgot Spike's Tactical

Include RRA, LMT, Armalite, and Les Baer. Doesn't leave much.

Add DSArms and Stag Arms. And no more sending stuff to ADCO.

Beyond that, you can look at OEMs. Example... POF is in Arizona, but use Rock Creek barrel blanks which come from Wisconsin. Tons of people use CMT/Stag OEM parts.
Link Posted: 11/16/2012 3:36:43 PM EST
Originally Posted By jdubya87:
Would buy a rifle length monolithic upper.


+1
Link Posted: 11/16/2012 3:58:12 PM EST
[Last Edit: 11/16/2012 3:58:30 PM EST by dj_taboo]
I didn't think anything was wrong with the old logo. I might like the new scope mount.
Link Posted: 11/16/2012 4:08:05 PM EST
I'm digging the new logo!
Representing the 2-5-3.

The old logo looked dated, like I should be on a peechee folder.
In addition to my colt, I have an aero p. upper and a lower, roll marked with the Surplus Ammo logo.
Link Posted: 11/16/2012 6:23:21 PM EST
I like the new logo ,looks clean. I will be pissed if the American flag was removed from the upper. I get a lot of complements from people when they see the flag on the upper. Can't really beat the price to,well pre election. Well see what happens in the next few months.
Link Posted: 11/16/2012 7:11:04 PM EST
So what is the relationship between Aero and Armalite? That looks just like the monolithic that Armalite markets and if I remember right their 308 lowers are armalite pattern.
Link Posted: 11/16/2012 8:40:37 PM EST
Originally Posted By ALASKANFIRE:
So what is the relationship between Aero and Armalite? That looks just like the monolithic that Armalite markets and if I remember right their 308 lowers are armalite pattern.

Armalite sells that Aero upper.
Link Posted: 11/16/2012 10:19:40 PM EST
About time.
Link Posted: 11/17/2012 6:00:05 AM EST
[Last Edit: 11/17/2012 6:01:27 AM EST by LMTRocks]
We got MFGs here. Accurate Armory and Doublestar. Why buy from a blue state when you can get from a red state

ETA: I'd like a monolithic someday but I can't figure out what to install.
Arrow Left Previous Page
Page / 2
Top Top