Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/7/2006 12:01:18 PM EST
I finally took my new AR to the range today. This is my first AR and the first time this one has been shot. I was setting IBZ and having a hell of time turning the front sight. No problem holding down the detent and keeping it down but all I had to rotate the sight with was a pair of needlenose pliars. This was very difficult and the front sight started to get round. I got it close, but stopped when I started doing damage.

I'm going back to the range tomorrow to shoot some more and to dial in IBZ.

Is there a tip or trick or a tool that I should be using to get that little sucker to rotate?

~ Wyatt
Link Posted: 1/7/2006 12:07:45 PM EST
[Last Edit: 1/7/2006 12:08:37 PM EST by twonami]
tools are available and not expensive at all. they start at $5
Link Posted: 1/7/2006 12:45:01 PM EST
Yep, they have a tool like the one posted above... You can also use the tip of the .223/5.56 bullet to push down the detent and turn the post too...
Link Posted: 1/7/2006 12:56:51 PM EST
I figured something out. I may get a tool next time I order something or if my dealer has one. In the meantime, a drywall screw fits right over the front post with the corners of the square post fitting snuggly into the grooves for a the phillips head driver.

I just clamped that screw into a small pair of vise grips and that easily turns the post when the detent is pushed down.

Actually, once the front sight is set, I won't need no stinking tool. That's $5 more for ammo.

Link Posted: 1/8/2006 11:13:38 PM EST
The tip of a firing pin works.
Link Posted: 1/9/2006 2:01:27 AM EST
you all ready have all the tools you need to adjust the front site.
Link Posted: 1/9/2006 2:08:08 AM EST
[Last Edit: 1/9/2006 2:11:22 AM EST by eye_spy]

Originally Posted By Gregory_K:
you all ready have all the tools you need to adjust the front site.


The FSP adjustment was designed in such a way that you do not need "special" tools to adjust them. All you need is the tip if your 5.56 bullet. Push detent pin downward with the tip of your bullet and "dial" the FSP clockwise or counter clockwise.
Top Top