Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/25/2006 8:59:49 AM EST
I just picked an action block from bravocompany and it has model1sales stamped all over it.

The block holds the upper so loose that I have enough room to actually wrap a t-shirt around the upper to take up the play. It is hard injected molded plastic.

Is this normal???
Link Posted: 2/25/2006 9:11:04 AM EST
Are you sure it's in there correctly?
I have the black plastic type that's hinged on the bottom, it fits like a glove. I used mine last night to mate an M4 barrel and M4 upper.

JoeLad
Link Posted: 2/25/2006 9:16:26 AM EST
Yep, it fits in there and mine is hinged at the top. It is closed at the bottom and closed at the top but also has a slot for the carry handle inside it.
Link Posted: 2/25/2006 9:20:51 AM EST
Send it back and get a DPMS or Schuster block.
Link Posted: 2/25/2006 9:25:35 AM EST
Mine worked fine for me when I used the t-shirt method. Just make sure you insert the inner part to support the receiver.
Link Posted: 2/25/2006 9:28:18 AM EST
[Last Edit: 2/25/2006 9:32:53 AM EST by jackal2001]

Originally Posted By Hooligan22:
Mine worked fine for me when I used the t-shirt method. Just make sure you insert the inner part to support the receiver.



Ya I did that now I encountered another problem, I can't get the damn inner part out with the dust cover shut, it won't force the dust cover open.

nevermind, i got it out, put on floor, hold with feet and yank.
Link Posted: 2/25/2006 3:51:49 PM EST
are you putting it in the vise? tightning it down good?


i use the bushmaster block but after crushing an upper and handling the dpms block with insert it seems to be a better tool
Link Posted: 2/26/2006 12:35:15 AM EST
I got mine from CMMGINC !! WORKS GREAT!!
Link Posted: 2/26/2006 4:50:57 AM EST
Well I cut a tshirt up and placed it nicely around the upper so I didn't have a lot of cloth in there. put it in the vise with the plastic fake bolt assembly group thing, tightened it up in the vise and removed my barrel.

I didn't crush the upper. Both the top and bottom portion of the action block is closed. I think they made it this way so it would be really hard to crush the upper.
Link Posted: 2/26/2006 5:23:56 AM EST
[Last Edit: 2/26/2006 5:24:17 AM EST by DM1975]

Originally Posted By eklikwhoa:
i use the bushmaster block but after crushing an upper and handling the dpms block with insert it seems to be a better tool

You would think that for $50.00 for a chunk of plastic it would work better.
Link Posted: 2/26/2006 9:14:38 AM EST
Do like i did pad blocks with felt!
Top Top