Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/7/2006 5:38:29 PM EST
[Last Edit: 3/8/2006 4:25:44 AM EST by olyeller]
I bought a lnib ARMS 40 off of the ee, and Im wondering what the trick is with this slotted nut they use to clamp the thing down. By the time I tighten it with a screwdriver, the threaded crossbar pops through the nut and I cant tighten it any more. Its still pretty loose.
Before I get out the vice grips, someone want to help me out?

Is this an ingenious built-in idiot guard to prevent over torqueing or am I just a 'tard?

Link Posted: 3/7/2006 8:02:46 PM EST

I have put many of them on and I have never had that problem before, I guess it is possible that the bolt is out of spec and may be a little too long, you might try contacting ARMS, I am sure they will take care of it for you. What part of OK are you in?
Link Posted: 3/8/2006 1:34:57 AM EST
screw the crossbar a turn or two farther into the clamp before attaching the nut.
Link Posted: 3/8/2006 3:17:55 AM EST

thread it in further on the other side so it doesnt get in the way of the slotted nut if not get a bigger screwdriver.
Link Posted: 3/8/2006 4:24:39 AM EST

ding ding ding,
we have a winner!
The x-bar could tuen another full thread.
Thanks much!!

Im just South of OKC.
Top Top