Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/7/2006 12:17:39 AM EST
[Last Edit: 2/7/2006 3:02:32 PM EST by lt557]
I just purchased a set of these from DSG Arms (excellent service BTW). Prior to installing them I am thinking about installing them without the handguard retainer in place.

I have done this on my old AR using a yankee hill rail tube. From the pic I have seen here the MI tube seems a bit shorter that other FF tubes out there.

Would it cause an unsightly gap? I have a pinned on Phantom so I cant experiment. If i cut the retainer off its gone. No looking back.

If someone here has picks of their MI rail installed without the retainer could you please post them.
Link Posted: 2/7/2006 12:46:36 AM EST
Why not try it with the clip on there first, and then remove it if you don't like it? I think unsightly is more or less subjective, so it might not be easy to get a straight answer.
Link Posted: 2/7/2006 3:20:06 AM EST
[Last Edit: 2/7/2006 3:21:00 AM EST by Trey-W]
yes it will cause a gap.
Link Posted: 2/7/2006 3:01:34 PM EST

Originally Posted By bolster:
Why not try it with the clip on there first, and then remove it if you don't like it? I think unsightly is more or less subjective, so it might not be easy to get a straight answer.



I plan on that. Once again if I cut my own off, no turning back.

A pic would be great.
Top Top