Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/2/2003 6:52:25 PM EST
Got a bushy upper and am trying to mount my ACOG and ARMS #19S and ARMS#40.
Absolutely cannot get the #40 to slide on. No way, won't budge past the rear wedge(?). The ARMS #19S will go on but it takes alot of force and I had to pry the damn thing back off with a screwdriver in order to get it off.
Now obviously it would seem that the picatinny rail is not milspec dimension wise but I thought I'd check it out here first to make sure I am not doing something wrong.
Link Posted: 7/2/2003 7:45:08 PM EST
Gave up and put 'em on my Colt upper. Fit right on, no problem. I just hope I didn't damage the clamp on my ARMS#19S. Hell, just got the thing back after returning because they didn't perm affix the FS. Call tomorrow and return again. Last week I got dicked around by SableCo. 2 bad experiences out of 2 with them. About ready to give up on internet purchases for awhile.
Link Posted: 7/2/2003 9:41:42 PM EST
My #40 took a few raps with my knuckle to get it to the slots in the upper on my BM. My #19-S went on just fine. Before you purchase on the 'net, check out whomever you're going to be sending your money to. There are several companies that advertise here that have earned reputations for outstanding service. Before I buy, I ALWAYS go to the EE, and look 'em up in the feedback section.
Link Posted: 7/3/2003 12:34:15 AM EST
Not to sound stupid, but you are installing the #40 from the rear of the flattop correct?
Link Posted: 7/3/2003 5:50:44 AM EST
Originally Posted By fistpoint: Not to sound stupid, but you are installing the #40 from the rear of the flattop correct?
View Quote
No, I thought it jus went over the top. I tried beating it down with a hammer but it wouldn't budge. Maybe I didn't hit it hard enough![:D] Just kidding. Yes, from the rear. The #19S did go on due the different nature of the clamp but it was difficult to get on and so I pulled it right back off--very difficult to get back off. talked to Bushy this AM and it is going back for a new upper rec.
Link Posted: 7/3/2003 9:00:12 AM EST
I've got a few Bushys with #36 and #38 Arms swan sleeves and they went perfect...had a little trouble with one on an RRA upper.
Link Posted: 7/3/2003 9:33:58 AM EST
What is the 19S ?
Link Posted: 7/3/2003 9:49:26 AM EST
Originally Posted By fell-off-the-truck: What is the 19S ?
View Quote
It is an ACOG mount with a single lever.
Top Top