Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 11/2/2009 12:36:17 AM EST
I'm wanting to put together a rifle as a going away gift for the company commanding officer in my reserve unit. He's been a great CO and deserves a lot of credit for all he's done to make this a good unit.

Anyway, I've been thinking of putting together a 20 inch AR15. It will have a regular stock. What I was thinking of having done was having a unit coin inset into the stock on both sides and then having some words engraved into the lower receiver....basically recognizing his time with this unit.

So, who could I contact that people here would recommend to do some work like that? It won't be real elaborate but just some simple engraving and some work on the stock.

Thanks in advance!!
Link Posted: 11/2/2009 1:27:04 AM EST
I don't know about the coin setting, but Ident Marking does great engravings.

http://identmarking.com/
Link Posted: 11/2/2009 1:29:56 AM EST
don't know about the stock work but you could check here for the engraving.

http://orion-arms.com/new/content/view/20/74/

i've had them do some work on 3 different receivers and it's always top notch
Link Posted: 11/2/2009 2:00:04 AM EST
Link Posted: 11/2/2009 4:49:52 AM EST
[Last Edit: 11/2/2009 5:01:02 AM EST by texjames]
A lot of great engravers around. I found a local guy to Engrave my lower for SBR and he does some awesome stuff.Near Abilene Tx. Check the website.
All done by hand.....http://www.ottocarter.com/engraving.html
I like this one...


Motorcycle part, cover...
Top Top