Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/5/2003 9:45:12 AM EST
Anyone have any trick's on how to get the foam tube back on the stock I can't get the goddam thing back on HELP
Link Posted: 10/5/2003 10:00:44 AM EST
Just wrap it in cord, or use a little oil on the tube. Not much but just enough to lose the stick.
Link Posted: 10/5/2003 10:37:30 AM EST
[Last Edit: 10/5/2003 10:41:54 AM EST by Carhlr]
Thanks I used some dish liquid but was it a PAIN IN THE ASS I hope I never have to replace it. This is the Third lower I've put together and everytime it get's easier and if I do say so myself I'm getting pretty good at this $hit.
Link Posted: 10/5/2003 10:49:34 AM EST
I used baby powder and it worked well, but it was a little trouble cleaning it off. --LS
Link Posted: 10/5/2003 4:30:07 PM EST
I must be lucky because I have had zero problems getting on or off either of the rifles I've installed it on.
Link Posted: 10/5/2003 5:15:44 PM EST
hairspray works great, nice and slick and dries so it doesn't slide or move. pain to get off though.
Link Posted: 10/5/2003 9:20:52 PM EST
Old trick for bicycle grips: A fews shots of windex While it's wet, it slides right on. Once it evaporates, it stays put.
Top Top