Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/6/2010 2:30:56 PM EST
Ok guys nOOb here with a silly little question pls see pics of my Bushmaster carry handle, it's a new rifle, can someone tell me why maybe my rear sight housing is twisted - it does not sit square to the handle. Shouldnt it sit square. I thought I was shooting ok but last time out was having problems, and I cant rememeber this thing always being like this or not. It did take a little fall not long ago but thinking I didnt damage it that bad (only very slightly scratched on top ears of housing - didnt fall on peep) but it's now cocked to the left. Does this thing have to go back to Bushmaster for repair?? Obviously this would affect my windage, correct? Thanks in advance for any help..


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us
Link Posted: 9/6/2010 2:40:11 PM EST
It is normal for the A2 sight to be a bit skewed.
Link Posted: 9/6/2010 2:54:29 PM EST
It is part of the design so that it can take an impact and not be broken easily.
Normal and does not effect windage adjustments.
Link Posted: 9/6/2010 3:05:44 PM EST
really - good to know. that was a quick one thanks fellas
Link Posted: 9/6/2010 4:17:25 PM EST
Link Posted: 9/6/2010 4:23:09 PM EST
[Last Edit: 9/6/2010 4:23:44 PM EST by Blown46]
yeah thx for the link I'm just gonna live with it for now eventually going optics / BUIS anyway
Link Posted: 9/8/2010 9:25:50 AM EST
You can also drill another hole & add another spring & detent ball , but the only advantage I can say over it & silver soldering a shim is ,no need to refinish sight housing .
Setting up another spring & detent is time consuming & not sure how much it will weaken the sight . I have done it to one rifle in the past . Customers choice & it worked ,but a PITA holding in two detent balls to get the sight on .Need six hands .Well maybe five.

The real answer is , its not a problem , mine shoot fine & I never notice it being cocked a little.
Link Posted: 9/8/2010 9:59:36 AM EST
Top Top