Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/8/2003 5:36:59 PM EST
Can I turn my A2 upper into a flat top?
Link Posted: 12/8/2003 6:50:46 PM EST
You can buy a new flat top reciver for $90 and switch them out. It is not complicated, but does require a few tools.
Link Posted: 12/8/2003 8:28:51 PM EST
That's how the original concept came to be, gunsmiths milled them down and installed weaver bases. Then someone decided to make it easier- Flattop upper. Buy one it is simple and you don't have to be a machinist to do it right.
Link Posted: 12/9/2003 5:06:43 AM EST
Yeah I looked into this as well as I had an extra A-2 upper and though hey it would be a cheap way to get a flat top. After checking around it was no savings at all unless you are a machinist and have your own mill. Just buy a flat top, you will be happier with the results. IPSC_GUY sends
Link Posted: 12/9/2003 8:31:10 AM EST
That is the same situation that I am in, I have an extra A2 upper and was trying to decide what to do with it. Any suggestions?
Link Posted: 12/9/2003 9:01:29 AM EST
[Last Edit: 12/9/2003 9:07:59 AM EST by Jetlag]
Sell it on the EE for $100. Buy a brand new flattop off the EE for [url=http://www.jobrelatedstuff.com/forums/topic.html?b=7&f=22&t=119504]$88[/url].
Link Posted: 12/9/2003 6:25:07 PM EST
This was my first Bushy (Vmatch 20). This is how they came- from the factory! [img]http://www.boomspeed.com/kisara/A1toA3.jpg[/img] It was the hot ticket- when it was new.
Top Top