Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/17/2003 8:42:42 PM EST
need some links to some 9mm m16 kits, barrels, bolts and blocks.
I'm really lookin for 10 1/4" HEAVY barrel upper, no brand preferrence.
And i think i saw somewhere that the rra block holds last round bolt open with uzi mags?
and somebody mentioned some ex-post sample 9mm kits for sale somewhere?
thanks alot any links will be helpful and appreciated.
Link Posted: 8/18/2003 8:41:44 AM EST
If you want Colt 635 sets, try a fella that posts as JED, he knew where some were that were rough looking, and a fella on the M16 forum sold/traded his PD's parts for 223 M4 uppers, he could probably point you to where they went. Also try: Bryan Pritchard - Tactical Weaponry - Class 3 - Law Enforcement Specialist 280 Lynshire Ct. Marietta, GA 30064 Phone: (770) 218-0107 Fax: (770) 514-1723 [email] bp1959@atl.mindspring.com[/email] [url]www.tacticalweaponry.com[/url] If you want a barrel made, WA Tom (has/had ad on Subguns under $500), Tony Gooch, maybe Dave Hineline, Kurt. Also refer to the 9mm FAQ at top of page.
Link Posted: 8/18/2003 10:05:17 AM EST
[Last Edit: 8/18/2003 10:07:17 AM EST by qd4gtz]
bolt hold open only works with colt mags, to the best of my knowledge. As for barrels, bolts, and uppers. You could go to [url]www.ar15sales.com/[/url] can get all things RRA including 9mm stuff. [url]www.rockriverarms.com/[/url] [url]www.gunkits.com/9mm.html[/url] [url]www.garrisonmfginc.com/[/url] Garrison shows a 11.5" 9mm barrel. I'm sure for a few extra $$$ they'd cut, thread, and recrown down to 10". Or you could get a RRA 16" and have it cut down.
Link Posted: 8/18/2003 11:43:42 AM EST
[Last Edit: 8/18/2003 12:40:00 PM EST by HoGKiLLa]
thanks alot, very helpful.Now, what about 10 1/4 or 11 1/2" uppers? and i see M&A carries 11 1/2 uppers but says for machine guns and LEO, would i be able to get one or would they bs about needin a SOT and C2? THanks again, Jeremy
Link Posted: 8/18/2003 2:04:51 PM EST
Some of the vendors will ask to see a copy of the Form-1 or Form-4 to make sure end user has a legit firearm to use a short barrel on, be it LEO, MG, or SBR. They are just covering their own butt, even though barrels and uppers are "free commerce" parts. You did not say why you wanted the short barrel, so I can only speculate to the situation and try to guide you in the right direction.
Link Posted: 8/18/2003 3:10:58 PM EST
My 16" RRA I cut to 6" [img]http://users.zoominternet.net/~picplace/M16A19mm.JPG[/img]
Link Posted: 8/18/2003 3:21:54 PM EST
its for a pre ban pistol. which they mention nothing about. i ordered a 11 1/2 for my uncles pre ban pistol from mod 1 with no hassle. but they say the 9mm 11 1/2 must be for either LEO or MG. WHAT about pistol, i cant order one for my pistol?
Link Posted: 8/18/2003 3:26:52 PM EST
Another 9mm link [url]http://ar15.com/forums/topic.html?b=3&f=14&t=167799[/url]
Link Posted: 8/19/2003 3:45:26 AM EST
always been curious joe. You're from France????
Link Posted: 8/19/2003 11:49:30 AM EST
whats the life expectancy of a chrome lined and chromemoly? Colt is what i want but lots of money, M&A or RRA cost less but chrome moly? i probably wont shoot over 20,000 rounds total outta my rifles. thanks
Link Posted: 8/19/2003 1:02:06 PM EST
Originally Posted By qd4gtz: always been curious joe. You're from France????
View Quote
[b][size=6]HELL NO!!!!!!![size=6][/b][pissed]
Link Posted: 8/20/2003 4:08:22 AM EST
Well what the hell is "FRA" for?
Link Posted: 8/20/2003 6:36:28 AM EST
Originally Posted By qd4gtz: Well what the hell is "FRA" for?
View Quote
OK OK I changed it
Top Top