Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Page AR-15 » Rimfire and Pistol Calibers
AR Sponsor: bravocompany
Posted: 8/17/2023 10:35:27 AM EST
I have a 9mm mag block that fits and operates perfectly in every brand lower I have except for my 4 Noveske lowers. It won't fit in any of them. I am wondering if anyone has a 9mm block that fits and works on your Noveske lower. If so, what brand is it? Doesn't matter if it's glock or colt. Thanks!
Link Posted: 8/17/2023 10:41:39 PM EST
[#1]
Quoted:
I have a 9mm mag block that fits and operates perfectly in every brand lower I have except for my 4 Noveske lowers. It won't fit in any of them. I am wondering if anyone has a 9mm block that fits and works on your Noveske lower. If so, what brand is it? Doesn't matter if it's glock or colt. Thanks!
View Quote


What brand mag block are you using ??


What did Noveske tell you when you called and asked them about it ??


What were the dimensions  of the magwell and the mag block when you measured them ??




.
Link Posted: 8/18/2023 9:50:58 AM EST
[#2]
I don't have a 9MM mag block but I used the Redi-Mag adapter which allows the use of S&W MP 15-22 mags in a standard lower with CMMG bolt.  It would fit in most magwells but some it would not.  Redi-mag suggested sanding and fitting their adapter as necessary to fit the magwell.

It may be that you have some sharp corners on the 9mm adapter that just barely won't let it slideinto place.  Make the adapter fit your magwell if you intend to use it on that specific lower.  Surely it can't be that far off if you can put magazines into your Noveske Lowers.  Or just use a lower that it fits in.
Link Posted: 8/18/2023 11:35:47 AM EST
[#3]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
I don't have a 9MM mag block but I used the Redi-Mag adapter which allows the use of S&W MP 15-22 mags in a standard lower with CMMG bolt.  It would fit in most magwells but some it would not.  Redi-mag suggested sanding and fitting their adapter as necessary to fit the magwell.

It may be that you have some sharp corners on the 9mm adapter that just barely won't let it slideinto place.  Make the adapter fit your magwell if you intend to use it on that specific lower.  Surely it can't be that far off if you can put magazines into your Noveske Lowers.  Or just use a lower that it fits in.
View Quote


What he said ^^^

My BMA would fit in all my lowers but the Aero lower because the inside corners of that lower are slightly radiused.  I had to sand the corners of the BMA slightly to fit the Aero, but it had no effect on the fit in the other lowers.
Page AR-15 » Rimfire and Pistol Calibers
AR Sponsor: bravocompany
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top