Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/31/2006 4:34:45 PM EST
I have a Model 1 Sales 7.62 x 39 upper for my AR rifle. I haven't shot it yet but have come acrossed an interesting situation concerning the caliber. I didn't know that Ruger's Mini Ranch Rifle which is made in the 7.62 caliber but with a .308 bullet diameter. I am assuming that uppers for the AR rifles are made for the .311 bullet diameter. That is the reason I bought the upper in the first place. I would like to shoot surplus ammunition in it. I called Model 1 and they said I could use either bullet diameter. I was wondering what bullet diameter other AR upper manufacturers are suggesting.

Thanks for all answers in advance.

Terry
Link Posted: 1/31/2006 6:20:50 PM EST
I shoot Wolf in my mini-30.

I don't think you will have a problem.
Link Posted: 2/1/2006 8:48:46 AM EST
Mini 14's have a long tapered leade so the bullet is swaged down to fit the .308 bore. M1S might use the same thing.
Link Posted: 2/3/2006 6:36:57 AM EST
Usually the "thicker" bullets in 7.62x39 are only .309-.310. I haven't heard anyone actually ever found any that had .311 bullets. Only true .311-312 bullets I've found are meant for .303 British.
I've measured some Wolf bullets myself and they were .309-.3095. Probably to make sure they won't cause dangerous overpressure in .308 bores. So generally this shouldn't be an issue, a couple of thousands thicker won't be hazardous unless the load is dangerous to start with and x39 is not a high pressure cartridge.
Top Top