Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 1/28/2011 11:03:19 AM EDT
Can anyone reccomend one and a good place to buy? I tried to search but could not dig anything up. Thanks guys.
Link Posted: 1/28/2011 11:09:19 AM EDT
If its for hunting, why not just drop a dowel or similar in under the follower ?
Link Posted: 1/28/2011 11:18:44 AM EDT
I think 44mag.com has 5 rnd mags
Link Posted: 1/28/2011 11:34:38 AM EDT
Link Posted: 1/28/2011 12:23:54 PM EDT
Originally Posted By HardShell:

Originally Posted By Glane5910:
I think 44mag.com has 5 rnd mags

http://www.44mag.com/product/308_5_magazine/dpms





Perfect Thanks!
Link Posted: 1/28/2011 12:27:53 PM EDT
I have been less than impressed with my DPMS factory 4 rounder.

I would try the C Products and research what it takes to cut down a Magpul if the C Products doesn't get it done for you.
Link Posted: 1/28/2011 4:22:15 PM EDT
midwestpx

They do cut down and pinned pmags.
Link Posted: 1/29/2011 1:42:31 AM EDT
C-Products is a 10 rnd with extra springs to only allow 5 rnds, sometimes 4 (just to be clear).
Link Posted: 1/30/2011 5:14:30 PM EDT
Takes about 15 min to cut down a pmag, I make 10 round by taking off 1/3 of the spring,half off the length if I really jam it 11 will go in, the bottom will pop off so I glue it on with RTV (can be removed with extra force) to make 4 round mags you could leave the whole spring (good use for a worn spring) and put in a plug, if it has to be permanent to be legal than use jb weld
Link Posted: 1/31/2011 4:55:48 AM EDT
I just got C Products mags from 44mag for my R-25 (DPMS).
Link Posted: 1/31/2011 12:50:36 PM EDT
For those that have the c products 5rds, are yours tighter than hell in the mag well? I just got mine in and had to nearly beat it out of the mag well. DPMS AP4 FWIW.
Link Posted: 1/31/2011 5:18:36 PM EDT
Originally Posted By chevy69002000:
For those that have the c products 5rds, are yours tighter than hell in the mag well? I just got mine in and had to nearly beat it out of the mag well. DPMS AP4 FWIW.


I have a CMMG lower and the 10rnd CP mags are pretty snug.
Top Top