Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 9/25/2004 3:54:32 PM EST
i must be retarded, but i've looked at several supplier's websites and can't find this item..does someone know where to find it? thanks !
Link Posted: 9/25/2004 7:42:30 PM EST
Link Posted: 9/26/2004 12:24:18 AM EST
yeah those 36" rods are common...i'm looking for a 30" rod..any idea where to find it?
Link Posted: 9/28/2004 5:27:12 AM EST
Make your own-- once the rod comes out of the ferrule ( bound to happen sooner or later). Cut the rod to the length you want with a Dremel or x-acto razor saw, then epoxy the rod and ferrule back together. I like the carbon rods, but they are too long and whippy and the ferrules do tend to pull off.
Link Posted: 9/29/2004 2:55:14 AM EST
I read on Midway's site that a lot of people had the graphite rods fall apart... and coupled with the fact they're hollow makes me wary of using them in a 24" barrel (or 20" barrel) due to the length and the amount of flex that is possible. A breech rod guide is almost mandatory but I've had cheap hollow rods snap.
Link Posted: 9/30/2004 1:01:51 PM EST
okies..gave up on the carbon fiber rod..and Brownell's DOES sell a 30" Dewey coated rod..it's almost impossible to find in their catalog or online, but it IS there ! and yes, it does fit in a 35" discreet case...WOOT
Link Posted: 10/7/2004 12:47:58 PM EST
deweyrods.com has 30' cleaning rods and lots of other good stuff
Top Top