Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 9/30/2011 4:13:57 AM EST
OK- might not belong here but: I got a new barrel from-!!!-
they did not tell me it was 1/2x28 tpi, so I ordered a A2 1/2x36
from -???-with the barrel.

Well it does not fit. I called them back only to find out they don't
have any in stock, and we are not sure when the machine shop
will bore out any more, so call back in a week.

End of story
Link Posted: 9/30/2011 4:39:08 AM EST
Just drill out a standard A2. Doesnt need to be too accurate, just larger than the bore. I prefer 28pitch to 36, lets me use the same suppressor mount for my pistol and AR.
Link Posted: 9/30/2011 6:11:37 AM EST
Well the machine shop wants $65.00 to drill out an A2-
Forget it!
Link Posted: 9/30/2011 7:15:32 AM EST
Originally Posted By rixxie33:
Well the machine shop wants $65.00 to drill out an A2-
Forget it!


no friends with a drill press?
Link Posted: 9/30/2011 7:56:35 AM EST
you could do it with a hand drill.
Link Posted: 9/30/2011 7:58:52 AM EST
Originally Posted By anjan9:
you could do it with a hand drill.


you mean gettin all "Red Jacket" on that flash hider?
Link Posted: 9/30/2011 8:04:25 AM EST
Can anyone explain to me how a 9mm can safely have 0.07" of barrel between the bullet and the flash suppressor safely? It seems far too thin. Is the suppressor that strong that it reinforces the barrel enough?

.5 inch diamater with .354 hole in the center...
.146 inches left of barrel metal making up two walls.
.073 inches per wall.

Are my dimensions wrong?
Link Posted: 9/30/2011 8:05:15 AM EST
Originally Posted By rixxie33:
Well the machine shop wants $65.00 to drill out an A2-
Forget it!


I'll send you an A2 flash hider that I drilled and reamed. IM me your shipping information.
Top Top