Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 3/13/2005 9:27:21 AM EST
[Last Edit: 3/13/2005 9:29:43 AM EST by dghboy315]
does anyone make an 18", medium profile, 1x7 or 1x8 twist, full length gas system barrel? i've searched everywhere for something like this. do i have to have it custom built? am i the only one who wants something like this?
Link Posted: 3/13/2005 9:43:19 AM EST
Come on guys, look at how this good question relates to other related threads. It deserves an factual, reasoned answer. For one, I think the answer is "no" and that the solution is to take an HBAR, cut it down and reprofile as required. Any other views?
Link Posted: 3/13/2005 9:58:28 AM EST
My 18" is a mid-length that Steve @ADCO reprofiled to M-4.
I have a Gov. contour that "MAY" be cut to 18 for my next build.


Link Posted: 3/13/2005 10:00:38 AM EST
[Last Edit: 3/13/2005 10:03:47 AM EST by Gamma762]
You're not the only one. Right now most of the interest seems to be going toward M4 and "government profile" barrels.

White Oak Armament has a nice stainless SPR barrel here. A bit much for a non-precision type rifle though.
Top Top