Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/25/2013 6:20:19 PM EST
Are there any companies that do this? Say I want a BCM 14.5'' middy with a Smith Vortex Enterprises muzzle device. Can they set that up to have that pinned and welded and sent to me? Or would I have to get both and have someone do that for me?
Link Posted: 10/25/2013 6:28:16 PM EST
I've had ADCO do a couple for me. You don't have to buy the barrel or the muzzle device from them.
Link Posted: 10/25/2013 8:42:57 PM EST
BCM will do so with 4 or 5 or so different FHs.
Link Posted: 10/25/2013 9:40:23 PM EST
I don't know if you want that exact setup or if you're using it as an example, but AIM has Spikes 14.5" Midlength with a pinned Vortex in stock right now.
Link Posted: 10/26/2013 5:43:32 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By tstone:
I don't know if you want that exact setup or if you're using it as an example, but AIM has Spikes 14.5" Midlength with a pinned Vortex in stock right now.
View Quote


I don't see them?
Link Posted: 10/26/2013 5:50:06 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Bosqueboy:


I don't see them?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Bosqueboy:
Originally Posted By tstone:
I don't know if you want that exact setup or if you're using it as an example, but AIM has Spikes 14.5" Midlength with a pinned Vortex in stock right now.


I don't see them?


Here
Link Posted: 10/26/2013 5:56:15 AM EST
Got it, thanks.
Link Posted: 10/26/2013 9:24:00 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Essayons:
I've had ADCO do a couple for me. You don't have to buy the barrel or the muzzle device from them.
View Quote


ADCO's work :

Link Posted: 10/26/2013 10:11:25 AM EST
Discussion ForumsJump to Quoted PostQuote History
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PursuitSS:
Originally Posted By Essayons:
I've had ADCO do a couple for me. You don't have to buy the barrel or the muzzle device from them.


ADCO's work :

http://i135.photobucket.com/albums/q125/PursuitSS/Postings%20photos/adc46d5c71728aa2efdb3ef1c278228a.jpg


I think it is unfair to just adco based on one bad job that was done in a location that isn't supposed to be used for pinning, because the hole is much larger than what they normally pin.

I'd still have no hesitation sending my gear to ADCO, they do outstanding work, and in the above instance, they are completely replacing anything that the owner requests, including the 300 dollar muzzle brake.
Link Posted: 10/26/2013 10:24:43 AM EST
[Last Edit: 10/26/2013 10:25:09 AM EST by 0331OC]
Rainier Arms did mine, for an extra $25, if I remember correctly. I dont think they did a bad job, but the Battle Comp 1.5 has a hole just for pinning and welding.
https://lh4.googleusercontent.com/-AyZDBXyZ7jI/UmwWe9Z0gdI/AAAAAAAAAtw/p7r57g4UWN8/s600/IMG_20131026_121936.jpg

https://lh6.googleusercontent.com/-TBYwRMFzgek/UmwWYGJ9LZI/AAAAAAAAAtk/IkbH8XOrOxQ/s600/IMG_20131026_122000.jpg
Link Posted: 10/26/2013 10:25:56 AM EST
[Last Edit: 10/26/2013 10:40:59 AM EST by tstone]
Discussion ForumsJump to Quoted PostQuote History
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PursuitSS:
Originally Posted By Essayons:
I've had ADCO do a couple for me. You don't have to buy the barrel or the muzzle device from them.


ADCO's work :

http://i135.photobucket.com/albums/q125/PursuitSS/Postings%20photos/adc46d5c71728aa2efdb3ef1c278228a.jpg


Way to post that out of context


Left is Rainier, right is BCM

Link Posted: 10/26/2013 1:56:24 PM EST
Discussion ForumsJump to Quoted PostQuote History
Well, in light of your post it's only fair to show some awesome work ADCO had done.





Link Posted: 10/26/2013 2:07:48 PM EST
It sounds like ive got some options available. Thanks guys.

Link Posted: 10/26/2013 5:20:21 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By mdean2011:
It sounds like ive got some options available. Thanks guys.

View Quote


If you are anywhere near KC, I've had Snapshots (formerly Denny's) in North Kansas City, do a couple for me. They turned out great.
Link Posted: 10/26/2013 5:44:43 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Marksman14:


I think it is unfair to just adco based on one bad job that was done in a location that isn't supposed to be used for pinning, because the hole is much larger than what they normally pin.

I'd still have no hesitation sending my gear to ADCO, they do outstanding work, and in the above instance, they are completely replacing anything that the owner requests, including the 300 dollar muzzle brake.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Marksman14:
Originally Posted By PursuitSS:
Originally Posted By Essayons:
I've had ADCO do a couple for me. You don't have to buy the barrel or the muzzle device from them.


ADCO's work :

http://i135.photobucket.com/albums/q125/PursuitSS/Postings%20photos/adc46d5c71728aa2efdb3ef1c278228a.jpg


I think it is unfair to just adco based on one bad job that was done in a location that isn't supposed to be used for pinning, because the hole is much larger than what they normally pin.

I'd still have no hesitation sending my gear to ADCO, they do outstanding work, and in the above instance, they are completely replacing anything that the owner requests, including the 300 dollar muzzle brake.


+1 - I'd be dissapointed with that, too. However the three ADCO have done for me look as good or better than the other photos in this thread and nothing like the one PursuitSS posted.
Top Top