Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Page / 51
Link Posted: 12/11/2007 12:15:16 PM EDT
Link Posted: 12/12/2007 1:51:01 PM EDT
Don't think I've posted yet.


Superior lower
RRA parts kit
RRA bolt, carrier
Equipment Exchange upper & barrel (unknown mfg.)
Eotech 512
Surefire G2
Arms 40L buis

It's a work in progress, may do a 4 rail handguard down the road
Link Posted: 12/14/2007 2:33:38 AM EDT
[Last Edit: 12/14/2007 11:48:46 AM EDT by Midget_With_a_Gun]
Here's my first rig that I put together using a completed upper.  I've been hanging around and sucking in all the good info here.  I've had to create a new name because my old registration was through an email server that no longer exists.  I only had a few posts so no big deal.  Thanks to all who answered my questions.

Some of these photos were taken during its 'Hollywood' configuration h
DPMS Lower
LMT Upper
CTR Stock
Young BCG
YHM rear sight
Accu-Wedge (which is bitchen)

Everything went together w/o a hitch.  I may be adding some optics after I spring for some ammo.  I'm also going to get a set of OD handguards or maybe a rail, but I think I might keep this one on the simple side.  I hope to do a full-build on my next one.

This is my first black rifle/long gun.  I have some H&K HGs that have brought me many smiles.  The only let down w/ this setup has been a minor gripe about the finish on the Magpul parts.  A post on that and a range report are soon to follow.


Link Posted: 12/14/2007 6:32:50 PM EDT

Link Posted: 12/15/2007 7:28:27 PM EDT

My fist 2 builds

Bottom.  Stag lower, stag LPK/CMT upper, dennys 14.7 SS bbl, YHM comp, UBR stock, M73 rails

Top.  Noveske lower, CMT upper, WOA match SS 18" bbl, RRA parts/2 stg trigger, DNTC comp, DD 9.0 rails
Link Posted: 12/15/2007 10:47:03 PM EDT
Wow, a zoomie with a black rifle.  That's almost as rare as a sailor with one.  Just kidding, nice rifles.  Semper Fi!
Link Posted: 12/16/2007 3:05:07 AM EDT

Originally Posted By SSgt82-02:
Wow, a zoomie with a black rifle.  That's almost as rare as a sailor with one.  Just kidding, nice rifles.  Semper Fi!

Zoomie....that hurts!   Univ of Nm.  I had a life.  Just kiddin, thanks for your service and Semper Fi!
Link Posted: 12/16/2007 1:19:27 PM EDT
Here one that I finished last night:

Stag lower receiver
Double Star lower receiver parts kit
Stag M4 buttstock kit
Stag upper receiver
Stag carry handle
Bushmaster bolt/carrier
Unknown charging handle
Unknown barrel nut
Sabre 14.5 M4 style barrel with permanently attached elongated A2 flash hider
Unknown sling
Link Posted: 12/18/2007 11:27:58 PM EDT
How do you post pics
Link Posted: 12/19/2007 12:06:24 AM EDT

Originally Posted By mharms:
How do you post pics

Click the magic pic button.
Link Posted: 12/19/2007 1:20:52 AM EDT
[Last Edit: 12/19/2007 12:04:12 PM EDT by FlDiveCop71]
Updated personal AR pic. Changed handgaurd to a KAC M4 RAS and added the Matech rear BUIS.
Slowly, but surely it's getting there...

(Sorry it's not in better focus. - I'm still learning how to take reasonable pics...)

Future Plans for this weapon:
VFG w/switch recess
SureFire Weapon Light
Aiming Laser
Aimpoint Comp M4
Tac Sling & Adapter Plate
Night Vision Device

Then I'll start on a 20 inch A4 type build.

ETA: POST #500.......WOOHOO!!!
Link Posted: 12/20/2007 2:35:27 AM EDT
Link Posted: 12/20/2007 2:39:10 AM EDT
[Last Edit: 12/20/2007 2:40:17 AM EDT by Globemaster]
Link Posted: 12/20/2007 9:25:31 AM EDT
Globemaster, the SNS lowers are made by Mega, right? I was thinking of grabbing one to use with another Mega upper build I am doing.
Link Posted: 12/20/2007 2:37:03 PM EDT

Originally Posted By Globemaster:
I’m not sure what caliber to build on this one yet

That Mega needs some 6.8SPC love.

I will definitely grab one of those sick SNS "skull" lowers to go with my Mega upper. I already have 2 complete Mega/Mega builds, but I'm digging the skull and crossbones! I'm doing a nifty 14.5" "recon" build with a LaRue 12.0. The SNS lower will be a sweet addition!
Link Posted: 12/20/2007 7:00:10 PM EDT
Originally Posted By SSgt82-02:
Wow, a zoomie with a black rifle.  That's almost as rare as a sailor with one.  Just kidding, nice rifles.  Semper Fi!

I'm with you on that one but I was with the brown dirt Navy but not seabee.
Link Posted: 12/22/2007 5:28:11 PM EDT
[Last Edit: 12/22/2007 5:30:44 PM EDT by AF_Blue]

RRA LAR15 from Steve @ Adco Firearms. 16" Fluted SS bbl KG coated. Daniel Defense, Ergo, Magpul, ARMS, YHM, KNS, Vltor and Eotech all accessorize.

(need a remedial lesson in posting from AOL)
Link Posted: 12/23/2007 12:26:58 PM EDT
Originally Posted By Irish_11:
This is a temp picture I'll take a better one at the range later this week. 20" Del-ton upper on a Superior arms lower. It was my college student build.

OH MY.....Thats a nice shade of ....CARPET....on your wall
Link Posted: 12/23/2007 12:33:40 PM EDT
Originally Posted By Arsenal762eu:
This is my 1st build. Its Finnish "selfbuild" version of American cousin in cal 5,56 NATO href=www.jartronicx.eu/kuvia/AR15SPR.jpg

I own also this Bulgarian AK cal 7,62x39 (sorry about pic size):


How dare you put a pic of that ...of that ....of that....AK on this sacred forum
Link Posted: 12/24/2007 9:13:29 PM EDT
[Last Edit: 12/24/2007 9:15:25 PM EDT by Otter-pop]
Link Posted: 12/24/2007 10:30:25 PM EDT
[Last Edit: 12/25/2007 5:47:02 PM EDT by QuarterStickNick]
LaRue Sniper sixteen

Link Posted: 12/24/2007 11:54:47 PM EDT
[Last Edit: 12/24/2007 11:57:34 PM EDT by Armed_Philosopher]
FirehawkCPO: I see you are in CA. You better get that 10 round mag fixed in that lower and repost right now you are advertising a no no
Link Posted: 12/25/2007 10:37:46 PM EDT
My first AR/Build. My coyote slaying machine

Stinger Arms lower
M&A 16'' CAR Flattop kit
1:8 Chromemoly heavy barrel
Tactical Tri-Mount
LED light
BSA 4X12X44 IR scope
I have put about 800 rounds through it so far, flawless
Link Posted: 12/25/2007 11:50:48 PM EDT
[Last Edit: 1/9/2008 4:04:22 PM EDT by Dread]
Clever light mount, I like it.

ETA: Page Ownage - must have pic!

KISS Build:

Link Posted: 12/26/2007 12:12:54 AM EDT
My 10.25" NFA sbr with all J&T parts but the bolt carrier which is a FNH m16 carrier.
All built by me in about 20 min.

Link Posted: 12/26/2007 10:10:52 AM EDT
[Last Edit: 12/26/2007 10:16:36 AM EDT by ARSHOOTER65]

DoubleStar Lower
DSC Tactical 2 stage trigger
DoubleStar 16" Lightweight Tactical Upper
YHM 2pc handguards
YHM folding front sight gas block
DSC DS-4 Buttstock
DSC Ergo Suregrip
Command Arms Folding Vertical Grip
GG&G Lightweight Tactical Bipod
Larue Tactical SPR-S QD Scope Mount
Weaver Classic Extreme 1.5-4.5 x 24mm Illum. German #4
Duracoat is a 7:1 mix of Desert Tan and OD Green
* have ordered the A.R.M.S. #40-L rear BUIS
Link Posted: 12/26/2007 5:05:21 PM EDT

CMMG 20" 1:7 Goverment Profile, Barrel Kit
RRA Stock
MEGA Upper
MEGA Lower
MEGA Charging handle
Magpul MIAD
Magpul PMags
Cheap Carry Handle, soon to be replaced
KNS Anti Rotational Pins
DPMS Ambi Safety
Link Posted: 12/27/2007 9:46:58 PM EDT
[Last Edit: 12/27/2007 9:48:38 PM EDT by gastungtsen]
Link Posted: 12/28/2007 8:03:51 PM EDT

Mega lower and upper
Olympic Arms 16" bbl
sights to come soon
Link Posted: 12/29/2007 5:14:57 PM EDT
made a couple of additions

Link Posted: 1/1/2008 12:50:32 AM EDT
[Last Edit: 1/1/2008 7:58:05 AM EDT by profbrightside]
My 1st build........


Eagle Arms Lower
RRA Predator Pursuit upper
PRS Stock
Geissele DMR Trigger
Larue SPR-E Mount
16X Super Sniper

I have a DPMS Lower on the way, haven't decided what this one will be yet.
Link Posted: 1/1/2008 10:47:07 AM EDT

Just learned how to post pics!
Have some more and better pics soon.

Link Posted: 1/3/2008 9:36:40 AM EDT

Originally Posted By brdvictim:
My 10.25" NFA sbr with all J&T parts but the bolt carrier which is a FNH m16 carrier.
All built by me in about 20 min.

hmm....a conveniently placed rubber band
Link Posted: 1/3/2008 10:17:27 AM EDT
[Last Edit: 1/3/2008 2:52:23 PM EDT by wools10]
Rifle 5.56 AR15 Clone Mega/Colt
Mega lower receiver, multi caliber, gator grip.
RRA lower parts kit.
Magpul PRS DE.
Magpul MIAD Grip kit DE.
Magpul 30/10 magazine w/windw
Prince magazine lock.
Stag ambi selector.
Unknown stock tube, buffer and spring.

Mega marked A4 upper receiver.
Colt 20" 5.56 HBAR, fully fluted. 1/7 twist. M4 feedramps. A2 flash suppressor.
Colt AR15 bolt carrier early SP1 type, and new Colt bolt.
Daniel Defense 12.0 lite rail with covers.
YHM gas block. Low profile top rail, with bayonet lug and sling mount. Bolt on type.
Front and rear Troy folding battle sights DE.
LMT charging handle.
Bushmaster ejection port door and round forward assist button.
Custom M60 bipod DE
Trijicon TR22
That is my Son shooting it.
Pics from 12/07. The rifle is currently being (upper and lower receivers, barrel, rails, complete) done in duracoat flat earth color. I'll have it back in a couple weeks.
I switched the upper to a Colt A4 upper, since the pics.
I'll add a new photo. The 16" carbine in the backround is my other build. These are my first "parts build" rifles the way I wanted them.
I'll post the pics of the 16" when I get some presentable photos.
Any comments, advice, or ideas are always appreciated.
Link Posted: 1/4/2008 3:36:17 AM EDT
^ was that at burro canyon??  Nice rifles btw.  
Link Posted: 1/4/2008 3:40:52 AM EDT

Originally Posted By bb2007:

Originally Posted By brdvictim:
My 10.25" NFA sbr with all J&T parts but the bolt carrier which is a FNH m16 carrier.
All built by me in about 20 min.


hmm....a conveniently placed rubber band
Its actually a piece of bike innnertube , and its cammo'd. Plus I'll never lose my bumpfire band lol.
Link Posted: 1/4/2008 4:52:20 PM EDT
Here is mine updated.  Still need to swap out sling for Single Point and add a verticle foregrip.


DPMS lower
Bushy A3 Flattop upper
Eotech 5.11 (w/A65)
A.R.M.S. 40L rear flip site
SureFire 500AB light system
Link Posted: 1/4/2008 6:42:44 PM EDT
[Last Edit: 1/4/2008 6:43:54 PM EDT by Mag_Dump]
Here a few of my finished build. I will change the optic at one point. I am thinking of going with an ACOG or a scout type variable 1-4. Oh it looks totally different in real life.

Link Posted: 1/5/2008 7:59:11 PM EDT
POF 415

Link Posted: 1/6/2008 1:28:41 AM EDT

ADS lower
Stag LPK
Stag upper
Armalite barrel assembly
YHM free float quad rail
you can probably figure out the rest

Plan on adding more rail covers and some kind of optic as my budget permits.

DIY paint job.

Don't mind the Coke stains h.gif
Link Posted: 1/7/2008 7:45:02 PM EDT
First NFA item.  LMT 10.5"

Link Posted: 1/7/2008 7:46:44 PM EDT
[Last Edit: 1/7/2008 7:48:48 PM EDT by gmill]
First Build:

Armalite Upper
Armalite Eagle Lower
DPMS Lower Parts Kit
Troy Front Battle Sight
Troy Rear Battle Sight
Viking/LaRue Sling
Magpul CTR Collapsible Stock Combo

Link Posted: 1/8/2008 3:58:46 AM EDT
ARSHOOTER65- May I enquire as to what type of barrel is used on that gorgeous rifle?
Link Posted: 1/8/2008 1:17:53 PM EDT
[Last Edit: 1/8/2008 1:19:29 PM EDT by chevyrulz]
here is my rock river arms kit.  got all the parts from a gunshow

Rock River upper w/ flat top
Rock River lower (pre-assembled)
Rock River 6 position stock
detachable carry handle from cheaperthandirt.com
1 30 round mag from gunshow
2 30 round mags from ctd

rubber pistol grip in the mail, will post new pics once mounted

contemplating an aimpoint or eotech, will likely use the bushnell trophy acog look-alike due to budget constraints


any advice on mounts for an aimpoint comp m2 with an aimpoint 3x magnifier for perfect cowitness would be most greatly appreciated.  note, i can never afford a larue tactical, so knockoffs would be preferred but any suggestions appreciated.  TIA
Link Posted: 1/8/2008 6:52:57 PM EDT
Here it is my first AR build...Parts are...

Rock River Upper (purchased separate from lower)
YH Phantom Flashider
Midwest Industries FF HG
Surefire g2 LED w/vltor mount
EOtech 512
Magpul Ladder Rail Covers
Rock River Stripped Lower
Rock River LPK
Standard 6pos Telescopic Stock
...Magpul enhanced trigger guard on the way...


M4 with its bushmaster bro


Thanks for Looking
Page / 51
Top Top