User Panel
User Panel
User Panel
|
Posted: 11/24/2008 7:13:23 PM EST
[Last Edit: Postal0311]
Formerly the MK18 / CQBR / L119 / Variants Thread Part 2
Part 2 to this thread: http://www.ar15.com/forums/topic.html?b=3&f=118&t=271832&page=1 The CQB-R is a short barrel upper for the M4 weapon system. Later the Upper on an M4A1 or rebuilt M16 lower is designated by the US Navy at the MK18Mod0 The CQB-R / MK18 Mod O is generally(but not always) 10/10.3/10.5 inch barrel KAC RIS or RAS KAC NT4 Suppressor Mount LMT Rear Sight or KAC 300m Flip Up Rear Sight LMT Sopmod stock CQD Rear sling mount CQD forward sling mount Optics are often an Aimpoint M2 or ACOG. The Block II CQBR replaces the Knights rail and the fixed front sight base with a Daniel Defense MK18RISII rail. Knights flip up front sight is often used. When rear sights are seen they are often either KAC or Matech. Our British friends have the L119 carbine. The L119 is similar to a MK18MOD0. The rifle is made in Canada, with a 10 inch barrel. Every pictures I have seen the the L119 has a Trijicon TA31 or a TA01NSN ACOG that has a piggyback Trijicon MRD. Note: There is the L119, and the L119A1. I have seen both used to refer to the carbine, and I am not sure which is the proper nomenclature. Yada yada yada, will edit inore info later. Including some of the LMT 10.5 vs Colt 10.3 argument. |
|
|
|
FL, USA
|
Posted: 3/9/2013 9:41:52 PM EST
[#1]
Clips right on yeayupp.... Comes off a little too easy IMHO but works excellent and looks pretty slick
|
|
|
|
Posted: 3/9/2013 9:47:52 PM EST
[#2]
Originally Posted By Stukas87:
Play rifle top, work rifle bottom: http://i83.photobucket.com/albums/j292/stukas87/goodone_zps2c49baae.jpg What is that mounted on your bolt release lever? |
|
|
|
|
Posted: 3/9/2013 10:34:39 PM EST
[#3]
Originally Posted By jBoy723:
Originally Posted By Stukas87:
Play rifle top, work rifle bottom: http://i83.photobucket.com/albums/j292/stukas87/goodone_zps2c49baae.jpg What is that mounted on your bolt release lever? It looks like Redi Mag extension, it just bolts on. |
|
|
|
|
Posted: 3/10/2013 12:02:46 AM EST
[#4]
Originally Posted By Lancelot:
Originally Posted By sturmjr:
Originally Posted By jwill242004:
http://i1299.photobucket.com/albums/ag67/jasonwilcoxxx/20130307_235231-2_zps2c2e9408.jpg Question about the SF SR07 pressure pad......I know it clips on to the rail. But does it clip right on, or do you have to slide it on from the end of the rail? Clips right on Sweet, thanks. |
|
|
|
|
Posted: 3/10/2013 12:40:29 AM EST
[#5]
Originally Posted By gunnut003:
Originally Posted By jBoy723:
Originally Posted By Stukas87:
Play rifle top, work rifle bottom: http://i83.photobucket.com/albums/j292/stukas87/goodone_zps2c49baae.jpg What is that mounted on your bolt release lever? It looks like Redi Mag extension, it just bolts on. Thanks..Being a lefty, I've never really considered a Redi-Mag so, didn't know what it took to mount one on. I thought it was some type of oversized bolt release add on. |
|
|
|
|
Posted: 3/10/2013 2:17:13 AM EST
[#6]
Originally Posted By jBoy723:
Originally Posted By gunnut003:
Originally Posted By jBoy723:
Originally Posted By Stukas87:
Play rifle top, work rifle bottom: http://i83.photobucket.com/albums/j292/stukas87/goodone_zps2c49baae.jpg What is that mounted on your bolt release lever? It looks like Redi Mag extension, it just bolts on. Thanks..Being a lefty, I've never really considered a Redi-Mag so, didn't know what it took to mount one on. I thought it was some type of oversized bolt release add on. It is a defacto "add-on" that you have to install if you put a Redi-Mag on a lower to make access to the bolt catch easier. |
|
|
|
|
Posted: 3/10/2013 9:08:29 AM EST
[#7]
I'm still disappointed that they quit making the redi-mod.
|
|
|
|
|
Posted: 3/10/2013 9:42:08 AM EST
[#8]
Went shooting with the girlfriend yesterday for the first time
 . She liked the M4-CQBR better than the M4A1 Block II 
|
|
|
|
|
Posted: 3/11/2013 3:47:31 PM EST
[#9]
A nice brown box of happiness was delivered today From ADCO.
|
|
|
|
|
Posted: 3/11/2013 4:17:11 PM EST
[#10]
Originally Posted By Lancelot:
A nice brown box of happiness was delivered today From ADCO.
Sweet! Standing by for pics.
|
|
|
|
VA, USA
|
Posted: 3/11/2013 4:59:26 PM EST
[Last Edit: rgb]
[#11]
Sold the m4a1 and 553 to fund this....
|
|
|
|
Posted: 3/11/2013 6:57:08 PM EST
[#12]
Cheap crappy IPAD down and dirty quick pic.
 For the amount of time they had it, ADCO did an amazing job. With luck I'll shoot it on Saturday. Now I have to play with furniture and stuff. |
|
|
|
OK, USA
|
Posted: 3/11/2013 7:03:26 PM EST
[#13]
Originally Posted By rgb:
Picked up my fde elcan today. Soo pumped! Pics or GTFO! That;s the first 3 rules of 'MK18 Club'. 
|
|
|
OK, USA
|
Posted: 3/11/2013 7:04:17 PM EST
[#14]
Originally Posted By Lancelot:
Cheap crappy IPAD down and dirty quick pic. http://farm9.staticflickr.com/8225/8550474396_62f1b1cb11_c.jpg For the amount of time they had it, ADCO did an amazing job. With luck I'll shoot it on Saturday. Now I have to play with furniture and stuff. Awesome!! I have seriously been thinkinng of ditching my TA44 ACOG for a T-1. They just look 'right'. Nice!! |
|
|
VA, USA
|
Posted: 3/11/2013 7:56:52 PM EST
[#15]
Congrats! Looks great.
|
|
|
|
Posted: 3/11/2013 8:57:24 PM EST
[#16]
Getting there.
 |
|
|
|
|
Posted: 3/11/2013 8:58:58 PM EST
[#17]
Originally Posted By Lancelot: Nice now stop playing with it in the house.lolCheap crappy IPAD down and dirty quick pic. http://farm9.staticflickr.com/8225/8550474396_62f1b1cb11_c.jpg For the amount of time they had it, ADCO did an amazing job. With luck I'll shoot it on Saturday. Now I have to play with furniture and stuff. |
|
|
|
|
Posted: 3/11/2013 9:28:25 PM EST
[#18]
Put together the start of my eod mk18
And a family pic 
|
|
|
|
|
Posted: 3/11/2013 9:35:38 PM EST
[#19]
Originally Posted By SilentMark:
Put together the start of my eod mk18 http://i81.photobucket.com/albums/j214/silentmark73/8391101C-ED67-42F5-B09D-FD55221157CA-6875-00000AD0771E7A3B_zps72aeb036.jpg And a family pic http://i81.photobucket.com/albums/j214/silentmark73/5F720017-22D3-4C71-8955-08BBC8484BCA-6942-00000AD3D5C0A73A_zps5fc37139.jpg Nice Trio...I have a FDE Magpul M93 that would go pefect with the EOD (remember seeing the EOD's with them) and may build one for myself based on that fact alone  ..
|
|
|
|
|
Posted: 3/11/2013 10:15:52 PM EST
[#20]
Originally Posted By jukeboxx13: Originally Posted By Lancelot: Nice now stop playing with it in the house.lolCheap crappy IPAD down and dirty quick pic. http://farm9.staticflickr.com/8225/8550474396_62f1b1cb11_c.jpg For the amount of time they had it, ADCO did an amazing job. With luck I'll shoot it on Saturday. Now I have to play with furniture and stuff. I'm posing in front of the mirror with my war face on. |
|
|
|
|
Posted: 3/12/2013 8:25:07 AM EST
[#21]
Originally Posted By Seaslug: I hate you guys... http://i101.photobucket.com/albums/m49/bsimpson23/LeftSide.jpg http://i101.photobucket.com/albums/m49/bsimpson23/RightSide2.jpg Two questions. What muzzle device is that? What color are the rail covers? I can see the FDE, but what is the other one? |
|
|
|
|
Posted: 3/12/2013 9:34:08 AM EST
[Last Edit: coregon]
[#22]
Originally Posted By Lancelot:
Originally Posted By Seaslug:
I hate you guys...
http://i101.photobucket.com/albums/m49/bsimpson23/LeftSide.jpg http://i101.photobucket.com/albums/m49/bsimpson23/RightSide2.jpg Two questions. What muzzle device is that? What color are the rail covers? I can see the FDE, but what is the other one? Muzzle Device = Surefire FH556-212A |
|
|
|
TN, USA
|
Posted: 3/12/2013 9:17:06 PM EST
[#23]
Originally Posted By Lancelot:
Holy crap, man! Did you just quote my post from page 81?? Originally Posted By Seaslug:
I hate you guys...
http://i101.photobucket.com/albums/m49/bsimpson23/LeftSide.jpg http://i101.photobucket.com/albums/m49/bsimpson23/RightSide2.jpg Two questions. What muzzle device is that? What color are the rail covers? I can see the FDE, but what is the other one? 
The other XTMs are OD Green. All of them are stippled also, so that's probably why they look a little different in the pics. |
|
|
|
Posted: 3/12/2013 9:39:22 PM EST
[#24]
Crappy picture of my 10.5 (kinda mk18) prior to going to the range! Now just waiting on the Surefire suppressor.
|
|
|
|
|
Posted: 3/13/2013 7:24:23 AM EST
[#25]
Originally Posted By Seaslug: Originally Posted By Lancelot: Holy crap, man! Did you just quote my post from page 81?? Originally Posted By Seaslug: I hate you guys... http://i101.photobucket.com/albums/m49/bsimpson23/LeftSide.jpg http://i101.photobucket.com/albums/m49/bsimpson23/RightSide2.jpg Two questions. What muzzle device is that? What color are the rail covers? I can see the FDE, but what is the other one? The other XTMs are OD Green. All of them are stippled also, so that's probably why they look a little different in the pics. Yes. Yes I did. Since taking possession of my upper I have reread this entire thread. I need a life. |
|
|
|
|
Posted: 3/13/2013 8:10:49 AM EST
[#26]
Ok quick question guys.
For a MK18 Mod 1 If I want to run a flashlight since I dont have the need or the cash to run one of those fancy laser systems... What is the correct light that they use? Is it an M600c? M952V? etc? |
|
|
|
USA
|
Posted: 3/13/2013 8:47:37 AM EST
[#27]
All mentioned should work. But in the Block II, you predominantly see (in pics) M3X long gun in tan, the WMX200, and M600C/M620C.
I have yet to see one with a M952V, but I wouldn't be surprised if some are using it. Obviously the M952/962 were used on the Mod0. |
|
|
|
Posted: 3/13/2013 9:07:20 AM EST
[#28]
Originally Posted By cmcflex:
All mentioned should work. But in the Block II, you predominantly see (in pics) M3X long gun in tan, the WMX200, and M600C/M620C. I have yet to see one with a M952V, but I wouldn't be surprised if some are using it. Obviously the M952/962 were used on the Mod0. Excellent, thanks! So if it was you, and you picked up an M952V, would there be any reason to try to swap it for a 620C or would you be just as happy with the 952? |
|
|
|
USA
|
Posted: 3/13/2013 9:31:52 AM EST
[Last Edit: cmcflex]
[#29]
Originally Posted By ShiftSix:
Originally Posted By cmcflex:
All mentioned should work. But in the Block II, you predominantly see (in pics) M3X long gun in tan, the WMX200, and M600C/M620C. I have yet to see one with a M952V, but I wouldn't be surprised if some are using it. Obviously the M952/962 were used on the Mod0. Excellent, thanks! So if it was you, and you picked up an M952V, would there be any reason to try to swap it for a 620C or would you be just as happy with the 952? My only beef with the M952V is the size of the M93 mount. It's a great light and I love the tail cap. Also, its size really shows if you ever decide to run your light offset. Further, you sacrifice some output with the dual head. I have settled on the M600C-TN for my Block II CQBR because of its size and output. I also really like the M3X/M6X with LED head for indoors: great flood and very bright (I was an early hater of the incan heads for these). It's small, compact, and it conforms with what you see regularly in pics (not a great selection criterion, but there you have it). Lights can be all over the place, so you should get whatever you want. A SF X300-U would even be cool , à la: 
ETA: here is a block ii CQBR with what looks like a M951/2 with SW02 tail cap: 
And my inspration for choosing the M600C: 
|
|
|
TN, USA
|
Posted: 3/13/2013 4:32:46 PM EST
[#30]
Too much?
|
|
|
FRA
|
Posted: 3/13/2013 4:41:10 PM EST
[#31]
Hi,
What is the model of this NightForce ? Originally Posted By Seaslug:
Too much?
http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3645_zps18556186.jpg http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3650_zps622c5b32.jpg |
|
|
TN, USA
|
Posted: 3/13/2013 4:42:26 PM EST
[#32]
Originally Posted By MISTERMOON:
2.5-10x32 with mil-dot reticle.
Hi, What is the model of this NightForce ? Originally Posted By Seaslug:
Too much?
http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3645_zps18556186.jpg http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3650_zps622c5b32.jpg |
|
|
|
Posted: 3/13/2013 4:47:58 PM EST
[Last Edit: coregon]
[#33]
Originally Posted By Seaslug:
Too much?
http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3645_zps18556186.jpg http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3650_zps622c5b32.jpg My pics aren't as purdy as yours, but I like where your heads at 
NF 2.5-10x24 goodness... 
|
|
|
|
|
Posted: 3/13/2013 4:52:46 PM EST
[#34]
NF + MK18 = Awesome!
|
|
|
|
|
Posted: 3/13/2013 5:15:54 PM EST
[#35]
Originally Posted By Postal0311:
NF + MK18 = Awesome! https://lh3.googleusercontent.com/-gpvRJBM0ass/TVRXtkaIvRI/AAAAAAAACRI/zOPCBkK41j0/s1024/2011-02-10%252016.13.22.jpg Drool
|
|
|
|
|
Posted: 3/13/2013 6:05:27 PM EST
[#36]
Originally Posted By coregon: Originally Posted By Seaslug: Too much? http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3645_zps18556186.jpg http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3650_zps622c5b32.jpg My pics aren't as purdy as yours, but I like where your heads at NF 2.5-10x24 goodness... http://i905.photobucket.com/albums/ac251/coregon/DSC_0579-1_zps82999f39.jpg http://i905.photobucket.com/albums/ac251/coregon/DSC_0582-1_zps9ec6d313.jpg That makes me so mad. We've banned people for less. Showing an unobtainable scope is the end of the line pal. Unless of course you want to save your membership by sending it to me. |
|
|
|
|
Posted: 3/13/2013 6:29:52 PM EST
[#37]
Originally Posted By Lancelot:
Originally Posted By coregon:
Originally Posted By Seaslug:
Too much?
http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3645_zps18556186.jpg http://i101.photobucket.com/albums/m49/bsimpson23/DSCN3650_zps622c5b32.jpg My pics aren't as purdy as yours, but I like where your heads at
NF 2.5-10x24 goodness... http://i905.photobucket.com/albums/ac251/coregon/DSC_0579-1_zps82999f39.jpg http://i905.photobucket.com/albums/ac251/coregon/DSC_0582-1_zps9ec6d313.jpg That makes me so mad. We've banned people for less. Showing an unobtainable scope is the end of the line pal. Unless of course you want to save your membership by sending it to me. - I combed Heaven and Earth for this thing and FINALLY found one (that wasn't a FC2 reticle - this one is Mil-Dot) and got it for a STEAL!
I highly recommend, if you can find one. I'd like to find another one and was considering just buying a x32 model - but I am seriously considering a Leupy Mark 6 1-6 now... |
|
|
|
|
Posted: 3/13/2013 7:09:25 PM EST
[#38]
IF you can find one...
|
|
|
|
|
Posted: 3/13/2013 8:46:19 PM EST
[#39]
There were a couple of NF 2.5-10x24 scopes for sale recently. Much higher prices then I paid for mine, but I guess people are willing to pay it.
I bought mine new (Mil/Mil/ZS/NV illumn) for $1360 shipped. Hell, when I had a Specter DR I paid $1100 for it, and sold it for $1100. I don't get people paying crazy prices for stuff. |
|
|
|
|
Posted: 3/13/2013 9:29:18 PM EST
[#40]
Originally Posted By Postal0311:
There were a couple of NF 2.5-10x24 scopes for sale recently. Much higher prices then I paid for mine, but I guess people are willing to pay it. I bought mine new (Mil/Mil/ZS/NV illumn) for $1360 shipped. Hell, when I had a Specter DR I paid $1100 for it, and sold it for $1100. I don't get people paying crazy prices for stuff. Yep, I paid $1050 shipped for mine just a couple of weeks ago and couldnt believe it - brand new and never mounted. I almost gave $1500 for one on here, but the guy decided to keep it (Thank God!). |
|
|
|
OK, USA
|
Posted: 3/13/2013 10:17:22 PM EST
[#41]
Trying a new stock and grip.
Vltor IMOD and Magpul MOE-K grip I freaking love the feel of both of these. They both came FDE and I hated the look so I got out the RIT dye. I like how the mag and grip turned out, kind of a grey/charcoal, but the stock just wouldn't take the dye. I ended up just going pretty much black with it. It still wouldn't take in some spots on the stock, and the tube caps wouldn't take at all so I ended up coloring them black with a sharpie, probably won't last.
|
|
|
WA, USA
|
Posted: 3/13/2013 10:54:25 PM EST
[#42]
Your suppressor looks like it barely has enough room to attach.
Nice gun! Originally Posted By cmcflex:
Originally Posted By ShiftSix:
Originally Posted By cmcflex:
All mentioned should work. But in the Block II, you predominantly see (in pics) M3X long gun in tan, the WMX200, and M600C/M620C. I have yet to see one with a M952V, but I wouldn't be surprised if some are using it. Obviously the M952/962 were used on the Mod0. Excellent, thanks! So if it was you, and you picked up an M952V, would there be any reason to try to swap it for a 620C or would you be just as happy with the 952? My only beef with the M952V is the size of the M93 mount. It's a great light and I love the tail cap. Also, its size really shows if you ever decide to run your light offset. Further, you sacrifice some output with the dual head. I have settled on the M600C-TN for my Block II CQBR because of its size and output. I also really like the M3X/M6X with LED head for indoors: great flood and very bright (I was an early hater of the incan heads for these). It's small, compact, and it conforms with what you see regularly in pics (not a great selection criterion, but there you have it). Lights can be all over the place, so you should get whatever you want. A SF X300-U would even be cool , à la: http://i1080.photobucket.com/albums/j337/ert185/B8D92D27-D30D-4E16-BF41-E7CE5BA62893-8737-00000551469E8323.jpg ETA: here is a block ii CQBR with what looks like a M951/2 with SW02 tail cap: http://i1080.photobucket.com/albums/j337/ert185/4B32F31B-949E-4025-BFB2-62E3BB3E3F5A-12972-000002396C7DFA9D.jpg And my inspration for choosing the M600C: http://i1294.photobucket.com/albums/b609/SSGMAC11BAMF/3910_175271405944391_1824381445_n_zps831e4e20.png |
|
|
CA, USA
|
Posted: 3/14/2013 12:15:24 PM EST
[#43]
Anyone looking for the DD MK18 FDE rail is in stock at bcm right now, looks like they have 12 in stock at $334.95
http://www.bravocompanyusa.com/ProductDetails.asp?ProductCode=DD+8020+FDE |
|
|
|
Posted: 3/14/2013 8:08:23 PM EST
[#44]
 'Into the Breach' The latest 75th Ranger Regiment painting by Stuart Brown. |
|
|
|
PA, USA
|
Posted: 3/14/2013 10:57:39 PM EST
[#45]
Navy EOD
|
|
|
|
Posted: 3/15/2013 1:53:57 AM EST
[#47]
The flash suppressor is correct for a clone.
|
|
|
|
|
Posted: 3/15/2013 8:29:00 AM EST
[#48]
|
|
|
|
OH, USA
|
Posted: 3/15/2013 8:34:15 AM EST
[#49]
Looks good!
I still chuckle everytime I see a Surefire mini (choad).
|
|
|
|
Posted: 3/15/2013 9:25:57 AM EST
[#50]
Originally Posted By sturmjr:
So I noticed a lot of you bro's are using the SF 212A flash hider instead of the muzzle brake. I thought the sentiment was to use the brake on the 10.5 when running a suppressor. Muzzlebreaks suck. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
