Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/1/2005 4:38:06 PM EDT
alright took my psl to the range for the first time the other day and tried to sight it in.Found that no matter what I did the thing shot like a good couple feet high..Is there anyway to adjust the scope,from the inside(4xposp)..Really urking me ,I know its not the rifle because I took of the scope and shot with the regular iron sights it shot fine..Any ideas can I take the top off and adjust it with a little screwdriver or sometging..Well any ides would be great..Thanks...
Link Posted: 8/1/2005 5:04:40 PM EDT
Sounds like it could be a couple things. First I'd bore sight if possible. ie, remove bolt and sand bag rifle. look down bbl and then look thru scope. Adjust crosshairs accordingly without moving rifle. This will let you "see" how much more "up" adjustment you need.
Next I'd re mount the scope making POSITVE that it isn't twisted the opposite direction. (rightside up).
If the above two items both fail, shim the scope using .001 shims.
Link Posted: 8/2/2005 5:30:56 AM EDT
Link Posted: 8/8/2005 6:42:17 PM EDT
Ontop of youre scope adjustment knobs there are 3 screws. Leave the 1 in the middle ALONE and take out the two others. This should allow you signifagnt more adjustment to get the scope sighted in. When done spin the top of the knobs so that the screw holes line up and re insert screws. Before ya do that final step ya might wanna place the zero mark onto the slash but it up to you.
Top Top