Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 2/11/2006 10:49:57 AM EDT
well first of all its a oow reciever, with a hungraian feg sa-85 kit, i was going to use a tapco g2 fcg, but the bolt carrier and bolt doest even lock the hammer down when pulled back, i tried a boltcarrier and a bolt from a romanian and the same thing, are the pin holes not in the correct spot for the hammer pin or something on those recievers. I found that some people had problems with the g2 and oow reciever, but never what the problems were. Can someone enlighten me cuz an orginal fcg seems to work in it? Would and rsa one be the answer?
Link Posted: 2/11/2006 2:54:13 PM EDT
Never seen a problem with that combination . Check disconnector and hammer spring for proper placement .
Link Posted: 2/11/2006 8:41:40 PM EDT
yes it was all placed in there correctly, i guess i should have said the boltcarrier/bolt doesn't even push the hammer down far enough to lock in place
Link Posted: 2/11/2006 10:43:41 PM EDT
Is the sleeve installed? The G2 will not work without it.
Link Posted: 2/12/2006 12:11:50 PM EDT
yes the sleeve was installed
Top Top