Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/17/2006 6:58:19 AM EST
I heard that it is necessary to plug the barrel while parkerizing, but how would you plug the gas port hole ???
Link Posted: 3/17/2006 8:01:43 AM EST
Rubber plug
Link Posted: 3/17/2006 9:22:09 AM EST
i haven't plugged a single barrel in any of the park jobs i've done, and they've all turned out fine.


hard chrome doesn't react with the acid.
Link Posted: 3/17/2006 9:24:16 AM EST
silicone caulk. Let it cure before parking. should be fine. Silicone has a VERY high melting temperature, Much higher than the 200 degress of parking.
Link Posted: 3/17/2006 1:15:14 PM EST
Rubber plugs will work. If the barrel is chrome lined, then you really don't need to worry. If it's a Yugo barrel then park could affect the rifling.
Link Posted: 3/17/2006 3:06:07 PM EST

Originally Posted By tapeo1:
Rubber plugs will work. If the barrel is chrome lined, then you really don't need to worry. If it's a Yugo barrel then park could affect the rifling.



rifling? on a yugo? no way
Link Posted: 3/17/2006 3:29:22 PM EST
how much could it affect the rifiling, how much could it possibly add, and wouldn't the first couple down the pipe clean most of that out
Link Posted: 3/17/2006 8:53:31 PM EST

Originally Posted By pol_pot_47:

Originally Posted By tapeo1:
Rubber plugs will work. If the barrel is chrome lined, then you really don't need to worry. If it's a Yugo barrel then park could affect the rifling.



rifling? on a yugo? no way



Well, if you were fortunate enough to get a nice Yugo barrel Fortunately for me, I did! As for those sewer pipe Yugo barrels out there, then it probably doesn't matter... maybe it might actually help.
Top Top