Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page AK-47 » Chinese
Site Notices
11/22/2017 10:05:29 PM
Posted: 10/22/2004 9:38:05 PM EST
Hi all

I have had a Norinco for the last 11 or 12 years and all I have done to it is shoot it and clean it but the time has come to get a standard type stock for it...

question is how many US parts will I need to incorporate to make it 922 compliant, all I want to do is the pistol grip stock setup...no flash hider and no bayonet lug

also what parts count for these purposes and are the easiest swap out?

thanks in advance
Link Posted: 10/23/2004 1:57:43 AM EST
USA made handgaurds/forearm counts as 1
USA but stock counts as 1
USA made pistol grip counts as 1
USA made gas pistol Tampco counts as 1
USA Made trigger ass. Tampco counts as 3
USA mag follower counts as 1
USA made floor plare counts as 1


You need from what I have read to replace 5 parts. I would not do the mag parts, evertime you would buy a new mag you would have to put US parts in them
Link Posted: 10/24/2004 12:16:07 AM EST
thank you that is what I needed to know
Link Posted: 10/24/2004 3:14:16 PM EST
I wouldn't do the FCG (trigger assembly) as my Norico has a great trigger pull. I recommend that you don't change it if you are happy. The mag floor plates and followers are found at various web sites classifieds. They cost like a $1.50 a set. Very easy to change.
Link Posted: 10/26/2004 7:29:44 AM EST
Welcome Tonfa_Sartan.

Here's the best list concerning the "parts count question". This should give you all the options.

The Parts Count Question

Take care.

Sly
Page AK-47 » Chinese
Top Top