Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 1/17/2006 4:09:42 PM EDT
what's the best, or most efficent way of removing the front site, gasblock and rear site block from the barrel? for a person limited on tools? do you need a hyd. press?

Link Posted: 1/17/2006 4:21:50 PM EDT
If you plan on refinishing then use a Mapp torch to heat them up. I use an aluminum block and a hammer to knock them off and a piece of black pipe and a washer to knock them back on ...
Link Posted: 1/17/2006 7:03:04 PM EDT
I used press plates to remove my FSB and GB. Not sure how well this would work on the RSB tho.

Top Top