Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 2/13/2006 9:01:51 PM EST
[Last Edit: 2/16/2006 2:05:22 PM EST by hellbilly75]
Link Posted: 2/13/2006 9:48:46 PM EST

That looks good for a first!
from a flat too? SHeeeeiiiittt
Link Posted: 2/13/2006 9:59:01 PM EST
[Last Edit: 2/13/2006 11:28:20 PM EST by thedukeryan]
Link Posted: 2/13/2006 10:11:44 PM EST
If in fact that really is your first build, you done good!!!
Link Posted: 2/14/2006 3:14:26 AM EST
Goes to show, with a little resourcefulness, one can make an excellent looking build. No need for expensive toolings and such. Nice job!
Link Posted: 2/14/2006 3:19:48 AM EST
Link Posted: 2/14/2006 3:25:09 AM EST
I hate you. I'm jealous. h.gif Nice job; that's flawless!!
Link Posted: 2/14/2006 5:05:11 AM EST
Thanks for the feedback. here's what I got in it.

romy kit-dpharms
tapco flat
tapco rivets
g2 fcg
k-var us stock set


$30 in steel for the jigs
had a old set of bolt cutters for the rivet tool
110v flux core mig welder (borrowed)
big vice
hand tools

I will post pics of the jigs if anyone is interested. Mine are a little different than others I've seen. I made them with a angle grinder and an arc welder. They seem to work ok.
Link Posted: 2/14/2006 5:21:24 AM EST
Looks good. Hope my first one turns out that nice.

How does it shoot?
Link Posted: 2/14/2006 5:37:39 AM EST
It shoots real well. I put about 100 rounds through it and it didn't jam once. I fed it will three different mags to make sure it was gonna work good. It even liked the drum mag. My mak90 will jam every once in a while with the drum mag. 100 rounds isn't alot yet but so far, so good.
Link Posted: 2/14/2006 9:31:38 AM EST
That looks great.

I would really like to see pictures of the jig you made.
Link Posted: 2/15/2006 1:36:17 PM EST
Link Posted: 2/16/2006 1:59:56 AM EST
thats a great looking 1st build. Jod well done keep up the good work
Link Posted: 2/16/2006 5:25:09 AM EST
Nice jig, looks kinda scary but hey the finished product turned out great. So is that a wife or a daughter?


Link Posted: 2/16/2006 5:33:19 AM EST
Link Posted: 2/16/2006 5:41:44 AM EST
I've always been fan of "Supergirl" Nice work.
Link Posted: 2/16/2006 6:08:30 AM EST
Yeah, its scary lookin, but it does a good job. I've bent 3 flats so far and haven't lost one yet. The gal is my wife, cute ain't she. guess here age.
Link Posted: 2/16/2006 8:00:25 AM EST
How did you harden the soft steel flats?

Link Posted: 2/16/2006 9:13:16 AM EST
[Last Edit: 2/16/2006 9:13:28 AM EST by eric10mm]

Originally Posted By hellbilly75:
The gal is my wife, cute ain't she. guess here age.


Link Posted: 2/16/2006 9:30:04 AM EST
I used a oxy/ace torch. just did the rails and the hammer and trigger pin holes.

15, she'll be glad to hear that. Keep guessing.
Link Posted: 2/16/2006 9:36:29 AM EST
Thank you,
Link Posted: 2/16/2006 9:46:30 AM EST

How did you mount the rails for the bolt carrier ? I also do not have a spot welder so I would like to know.

P.S. Your wife looks like 10-12 in the state pen... J/K She is very cute .... 21 ?
Link Posted: 2/16/2006 10:14:16 AM EST
I drilled holes in the receiver and in the rails and plug welded it with a 110v flux core mig welder. I tried a test piece first just drilling the reciever but I couldn't get enough penetration. The receiver holes were .25 and the rail holes were .125. After that I dremel tooled it smooth. I got the Idea from a guy on here or one of the other ak forums. I put a punch against the end of the rail and hit it pretty hard and it didn't give. You can look inside at the holes in the rails to see how good a bite you got.

You are making my wifes day. Keep guessing
Link Posted: 2/16/2006 10:26:45 AM EST
At the most - maybe just turned 19. You sure you did not mix up photos w/ some picture of a kid holding your AK?
Link Posted: 2/16/2006 10:28:45 AM EST

Thanks Hellbilly...

I may do that if I get shot down with my silver solder idea....
Link Posted: 2/16/2006 12:02:59 PM EST
You guys are way off. Keep guessing
Link Posted: 2/16/2006 6:52:22 PM EST
She's really cute, but I'm not going to guess how old she is. Well, OK, she's half as old as my wife. How's that?
Link Posted: 2/16/2006 8:50:13 PM EST
Link Posted: 2/16/2006 8:58:39 PM EST
wife, born about 1980 I say.
Link Posted: 2/16/2006 9:18:30 PM EST

Originally Posted By hellbilly75:
You guys are way off. Keep guessing

THAT'LL get her loving you bigtime!

Keep diggin' that hole!

She's 25... end of story!
Link Posted: 2/17/2006 12:25:38 AM EST

Originally Posted By Tominator425:

Originally Posted By hellbilly75:
You guys are way off. Keep guessing

THAT'LL get her loving you bigtime!

Keep diggin' that hole!

She's 25... end of story!

I'm guessing 23 or so ?
Link Posted: 2/17/2006 4:54:21 AM EST
Your getting closer.
Link Posted: 2/17/2006 8:52:14 AM EST
Hey Hellbilly?

Let me know how it works when your wife finds out that we all have been guessing her age ranging from 15 to 25, and you were like "you are way off", "gosh, try again", "try again, you are getting closer"!

I personally would have lied on my wife's behalf and said "Yep, she is 25, good job guys!" (btw, my wife is 30-*cough* sumthin'.

Anyhoo! Your wife is 27... that is my final answer!
Link Posted: 2/17/2006 9:24:55 AM EST
Don't worry about me guys. She's not sensitive about it. I'll end it right now. She's 28. we can't go anywhere without her getting carded or old ladys throwing death stares at me like I'm some kind of pedophile. Oh, we have two kids too. She says she hates getting carded all the time, but we all know she loves it.
Link Posted: 2/17/2006 5:55:22 PM EST

Originally Posted By hellbilly75:
She's 28.

Ok, I was the closest! What do I win? Huh? Huh?

Top Top