Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/3/2006 12:27:18 PM EST
help!....last time i went out to shoot my wasr it jammed like 15 times...it wasent really jaming,it was not closing all the way.....this is really bugging me...any sugestions would help.
Link Posted: 2/3/2006 12:38:42 PM EST
Try taking the top cover and spring off, remove the bolt and slide the carrier back and forth. See if it is binding.

Put the bolt back in the carrier and try again.

Link Posted: 2/3/2006 9:21:54 PM EST
If it is hanging up on the rails, take some lapping compund and work it smooth.

I did this on my Yugo Build, and it is working great now
Link Posted: 2/4/2006 4:47:52 AM EST
Also if you replaced your gas piston the pin could be loose and stick out sometimes when cycling in and out of battery. It happen to me.
Link Posted: 2/4/2006 7:15:20 AM EST
to add to the above, I have also seen receivers with a slight bur running down the length of the rail (OOW) never seen it on a factory gun though. BUt you might check to be sure. even a slight bur can cause problems. There shouldn't be much a good lapping and streatching won't fix. Also. you may want to check the transition from lower rails to trunion.
Link Posted: 2/6/2006 9:54:06 AM EST
thanx boys......i will take al thai into concideration......i took it apart lastnight and worked on the rails a bit..it seems to be smoother than before.....i am going out to test today..so we will see.
Link Posted: 2/11/2006 11:34:51 AM EST
i took it out and put 120 rounds through it...it seems as though the magizine is trying to let go of two rounds at the same time....after working on those burs though it only messed up twice out of all that ammo...
Link Posted: 2/11/2006 3:59:15 PM EST
try different mags.
Top Top