Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/23/2003 4:06:58 AM EST
[Last Edit: 10/23/2003 4:10:23 AM EST by me223]
My latest project, a mutt RPK. It started as a Romanian parts kit. The barrel was junk, so I bought a brand new Bulgarian for it. There were a couple differences in the contours of each barrel. I couldn't use the original front sight base, so I used an altered Chinese one. The bipod was way too big for the barrel, so I made a spacer up for it. The original lumber is almost toast, so I went with the Drugonuv look. Had to build up the lower handgaurd with JB weld and fit with a "Gunmakers Friend", ie Dremel Tool!

All in all, it didn't come out too bad. The finish is our new black parkerizing, affectionately know as "Blark". Hence her name. She shot about a 4" group at 100 yards off the bench with iron sights, using good old Wolf JHP's. With the scope, she shot about 2' high, with no room for adjustment. A little shim stock should fix that.

I'll get some pics of the grouping when I get the scope dialed in.


Here's a close up of the alterations and the new finish:

Link Posted: 10/23/2003 4:10:41 AM EST
Nice, very nice!
Link Posted: 10/23/2003 4:47:33 AM EST
I saw the "Blark" finish up close. I'm impressed.

I took some photos of the RPK up close in the shop. I will post them tonight.

Link Posted: 10/23/2003 1:38:30 PM EST
[Last Edit: 10/23/2003 2:22:16 PM EST by CAMPYBOB]
Link Posted: 10/23/2003 2:16:26 PM EST
My thoughts exactly...ATI?!?! Oh the humanity..

take care,
Link Posted: 10/23/2003 2:22:59 PM EST
I think I will add this in the near future. Had the ATI stuff in the scrap pile, so I used it. You should see the original stuff, bad very bad.

Link Posted: 10/23/2003 2:26:35 PM EST

Originally Posted By me223:
I think I will add this in the near future. Had the ATI stuff in the scrap pile, so I used it. You should see the original stuff, bad very bad.



I'd like to be able to find that stock set Mike, nobody seems to have any RPK furniture??
Link Posted: 10/23/2003 2:30:01 PM EST
I think K-Var has them in stock. I am ordering some Krink kits tomorrow and will find out. If so, there will be more pics of the new look!

Link Posted: 10/23/2003 2:30:45 PM EST
Link Posted: 10/23/2003 3:57:59 PM EST

Doesn't show up under "Stock Sets" for some reason, but shows up under "Parts Sets".

Anyhow, yeah, I got that stuff for my NHM-91's that I'm sending ORF's way.

Hey, me223: Been speaking with Todd some over email, but since my laptop is back at Gateway for repair, I don't have access to that email account right at the moment.

What can you guys do to put a 24" barrel on the NHM-91, to give it that RPK-like look?

I mean, it's already 20", sure, but since I already have it, if it wouldn't be horrible, price-wise, to put the different barrel on it...

Link Posted: 10/23/2003 8:19:52 PM EST
[Last Edit: 10/23/2003 8:20:55 PM EST by 300ydClean]
Mike was probably wondering why I gave that stock set to him. Bwahahahahahahahahaha

"No charge old buddy, at least you'll be seen with it in public and not me"Bwahahahahahahaha

That stuff originally came off of a Chinese milled butthole rifle that some yahoo had used the ole camo tape on. That was a sight that would have made you toss your lunch.

Link Posted: 10/24/2003 12:39:32 AM EST

Link Posted: 10/24/2003 1:29:15 AM EST

The barrel alone will cost about $200.00. You will also need a gas block and a rear sight block, at the very least. I'm not even sure where to get the gas block and sight base.

Top Top