Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 5/4/2004 5:30:30 AM EST
Guys Im guessing I have to change the front sight housing out? Correct? TIA WarDawg
Link Posted: 5/4/2004 6:00:54 AM EST
If the muzzle is the right dia. all you need to do is thread it, screw on the brake and permenantly attach it. I've gathered some of the SAR1's came with a reduced dia. muzzle. Mine measures ~0.550" which should be the right size to thread @14mm.
Link Posted: 5/4/2004 9:03:12 AM EST
Link Posted: 5/5/2004 4:32:20 AM EST
OK great info on that site. Next question. Do I need to take the Front site houseing off or can I just cut threads right up against it and that the deep as I need to go with it. TIA WarDawg
Link Posted: 5/5/2004 7:39:37 AM EST

Originally Posted By WarDawg:
OK great info on that site. Next question. Do I need to take the Front site houseing off or can I just cut threads right up against it and that the deep as I need to go with it. TIA WarDawg



The front sight housing does not have to be removed.

According to another post, after threading with the chamfered side of the die facing the sight, you turn the die around and thread flush to the housing.
Link Posted: 5/6/2004 3:27:27 AM EST
Thank you sir. WarDawg
Top Top