Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/17/2003 7:58:15 AM EST
I just picked up an AK that is Hungarian. It is marked "FEG" on it and says "SA2000M" as well as "K.B.I. Inc Harrisburg, PA". It is black with the synthetic furniture. Will this gun take the "hi-cap" magazines? It came with 2 10-round magazines. Thanks for the response!
Link Posted: 7/18/2003 9:59:19 AM EST
Are the ten rounders that it came with single or double stacks? That will be the easiest way to tell. That may not be the most technical way to tell, but if the mags that came with it are double stacked then it should take standard AK mags, if you have a couple of Ak mags laying around, or maybe know somebody who has some all you have to do is attempt to put one in, if it fits then you are in business, if the mag well is to narrow then some quality time with a dremel tool has been known to solve the low cap issue.
Link Posted: 7/18/2003 10:36:28 AM EST
They're single stacks. Might have to look into the dremel thing once I pick up a hi-cap magazine to check for fit. Thanks for the response.
Link Posted: 7/18/2003 2:45:44 PM EST
I believe that there are instructions for the Dremel operation posted on this forum but it may take some searching to find, It is not very difficult to do as long as you measure your cuts carefully, remember that it is easier to remove metal than put it back on, don't be discouraged it is possible for you to do on your own, and the advantages are obvious, just compare prices of spare ten round mags to preban thirty rounders.
Link Posted: 7/18/2003 2:56:25 PM EST
Don't you have to change out factory parts with some US parts in order to make converting it to hicap legal?
Link Posted: 7/21/2003 2:31:13 AM EST
Top Top