Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/3/2006 12:41:53 PM EST
I can't stand the Tapco rivets sets and refuse to use another set. I want to use the rivets from the EE but need to know if a standard long rivet will work as the center support rivet?

thanks,
Ron
Link Posted: 4/3/2006 12:48:46 PM EST
---- wondering the same thing myself
Link Posted: 4/3/2006 1:34:39 PM EST
You mean a trunion rivet? If so, it will be too thick. Also, the head will need to be worked down to clear the selector.
Link Posted: 4/3/2006 1:34:45 PM EST
[Last Edit: 4/3/2006 1:36:26 PM EST by socandyman]
yep its just a 5/32 rivet

its not standard for the rear but it is a standard size
might have to mod the head alittle but nothan big
Link Posted: 4/3/2006 2:05:56 PM EST
Sounds like I can just take the standard rear trunion long rivet and chuck it up in the drill press and file to fit.....

thanks,
Ron
Link Posted: 4/3/2006 3:36:44 PM EST
Very good luck with the ones from K-Var. AK Builder has some that appear authentic. www.k-var.com/shop/home.php?cat=314 And ak-builder.com/ak/modules.php?name=Content&pa=showpage&pid=22
Link Posted: 4/3/2006 5:48:18 PM EST
how many do u need??? i have some that work great......5/32 1.5 inch long AND they have a rounded head like the other rivets, just hammer flat on the selector side
Top Top