Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 10/9/2007 6:29:01 AM EST
?
Link Posted: 10/9/2007 7:28:48 AM EST
Depends on what it is. A milled MAK-90 NIB, probably $550-600 or so. In Pre-ban you have so many configurations out there, fixed stock, underfolder, extra rare side folder with the bakelite piece, national match models etc. You're probably going to pay $1000 for the most basic fixed stock NIB milled pre-ban, and more for the less common features.

Unless you get lucky, and find a seller who isn't aware of current market prices.
Link Posted: 10/9/2007 7:30:08 AM EST
This would be a mak 90 milled
Link Posted: 10/9/2007 9:08:47 AM EST
I gave $250.00 for mine
Link Posted: 10/9/2007 11:49:38 AM EST
If you run across a model 386 MAK, it is made in the same factory as the Legends and they are nice rifles. They have the funny stock and the only way to change it is to get an Ironwood designs stock that I am aware of.
Link Posted: 10/9/2007 3:12:45 PM EST
I paid $400 a couple of years ago, but most go for $5-600 anymore. I love mine--it's very smooth compared to the stamped receivers. I made my own receiver block and mounted an Ace folder on it.
Link Posted: 10/9/2007 4:15:30 PM EST
I was happy to get one for $511.00 off of an auction a few months back. I'd been stalking for one for about a year and that is the cheapest I could get. I set my goal to get one for under $600.00, got beat out on quite a few that end up going for well over $600.00.
Link Posted: 10/9/2007 4:21:44 PM EST

In Pre-ban you have so many configurations out there, fixed stock, underfolder, extra rare side folder with the bakelite piece, national match models etc. You're probably going to pay $1000 for the most basic fixed stock NIB milled pre-ban, and more for the less common features..

There are no milled pre-ban Norincos. You are probably thinking of Polytech.
Top Top