Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/15/2005 8:50:55 PM EDT
rapidfire.targetweb.net/cgi-bin/store/agora.cgi/agora.cgi?cart_id=8243560.9296*Cu2-H4&p_id=02051&xm=on&ppinc=big

And what should it cost me?

Will I be happy when I'm done?

Thank you , very much, for your patience.

Regards,

Rick
Link Posted: 9/15/2005 10:13:28 PM EDT
Well, you would have to buy this: http://www.k-var.com/product.asp?3=693 just for the rear trunnion. You could then try to sell the extra stock. You'll also need a receiver. Not sure if you are going to build it yourself or send it to a gunsmith.
Link Posted: 9/15/2005 10:51:27 PM EDT
[Last Edit: 9/15/2005 10:52:21 PM EDT by clange]

Originally Posted By aztroop:
Well, you would have to buy this: http://www.k-var.com/product.asp?3=693 just for the rear trunnion. You could then try to sell the extra stock. You'll also need a receiver. Not sure if you are going to build it yourself or send it to a gunsmith.


The kit he linked to is a fixed stock version, and it comes with the rear tang.

Basically, you'll need a global 1.0mm receiver, G2 fire control group from tapco or someone on the EE, US gas piston, and US pistol grip.

THEN, you need the tools and know-how to rivet it together, or you need a builder that you can pay to do it.

US parts alone will be like $125 or more, and a professionaly build would cost a couple hundred more.

You're probably better off getting one of the SLR-105RA1 conversions jnewt is selling in the EE. Its probably cheaper, and you get a factory receiver, factory build.
Link Posted: 9/15/2005 11:05:22 PM EDT
Actually couldn't you get by with a US pistol grip or a US gas piston but not both so long as the muzzle attachment is US made.
Link Posted: 9/15/2005 11:16:24 PM EDT

Originally Posted By Ryan1021:
Actually couldn't you get by with a US pistol grip or a US gas piston but not both so long as the muzzle attachment is US made.


You could, but the kit comes with a bulgarian brake. I dont even know of any correct US made 24mm brakes, maybe ak-usa makes one, dunno.
Link Posted: 9/16/2005 4:06:03 AM EDT
Probbaly need a scope mount if you want one too.
Link Posted: 9/16/2005 6:03:06 AM EDT

Originally Posted By clange:
US parts alone will be like $125 or more,



Dude, you've got to find a new place to buy your parts.
A G2 FCG, gas piston, and PG all US made can be had for half of that.
Link Posted: 9/16/2005 7:53:11 AM EDT
[Last Edit: 9/16/2005 7:55:20 AM EDT by clange]

Originally Posted By maxxx93:

Originally Posted By clange:
US parts alone will be like $125 or more,



Dude, you've got to find a new place to buy your parts.
A G2 FCG, gas piston, and PG all US made can be had for half of that.


Receiver? I think you need one of those dont you?

Guess I could have said parts and receiver, oh well.
Link Posted: 9/16/2005 8:07:41 PM EDT
I was thinking about building it myself but I think the learning curve would be more like a cliff right now.

I'll look for a built model, actually, will probably hang and pick up a NV Arsenal 105 "variant."

Now, if I can figure out all the numbers.

It's much worse than ARs with CARs, LARs, M4s, A2s, etc, etc.

Every former comblock NATO member has a different series and sequence.

OK, I got it, no problem.

Thanks for the good info.

Regards,

Rick

PS Nice group here, thank you.
"I'll be back."

Top Top