Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/4/2005 4:14:39 PM EST
I just got a WASR-10 for 300$OTD. I really like it, and I was wondering if there was any way to "pretty" it up because the finish on the wood and the blue was kinda scratched. Its not metal deep. Is there any bluing stuff I should try. also, what should I do with the furniture? Is there any place with cheap plastic furniture? Thanks a million.
Link Posted: 12/5/2005 8:24:56 AM EST
Link Posted: 12/5/2005 9:49:31 AM EST
[Last Edit: 12/5/2005 10:09:13 AM EST by longhorn789]
I took a few ideas from the linx310 website when I got my WASR. I polished the bolt carrier and refinished the wood. Nothing to the metal finish however.

Click to enlarge

The wood finish was easy. I took the lazy mans route. Sand the old finish off, stain with Minwax Walnut, spray about 12 coats of Minwax Polyurethane. Check out the "Refinished Romanian Stocks" thread here for great information about the many ways to refinish..
Link Posted: 12/8/2005 4:50:15 PM EST
I got two GPWASRs and neither has a paint over park finish, they are blued, it's a dull blue because the maetal isn't polished very highly but it's still bluing. Actually the others I handled aren't painted either, is this a new thing they are doing?
Link Posted: 12/8/2005 9:13:04 PM EST
On my stock I just sanded it a bit with some medium and fine grit sandpaper, put a couple coats of a rosewood stain and then 4 coats of tung oil. Looks ok. Obviously I was lazy and didn't get the stock totally smooth before finishing, but it's not as if it's a fine showpiece. It's a shooter and function over form.
Link Posted: 12/9/2005 8:20:58 AM EST
try hitting it with some CLP, it worked wonders on mine.
Link Posted: 12/9/2005 9:26:53 PM EST
I removed the furniture off of mine (The wood) lightly sanded it and applied a coat of boiled linseed oil (I intend to srip off the oil finish and stain it this winter). I used 000 steel wool to polish the metal, degreased it and applied some cold blue. Rinsed it off polished again with the steel wool, repeated the process and coated it with CLP. Put the furniture back on and it looks much better. Still not real pretty but I like the way it shoots and functions!!!
Link Posted: 12/10/2005 8:19:15 AM EST
I got my red headed step child(wasr 10) at the gun show today for pretty cheap. I think it looks pretty good. I just checked before they put serial #'s down to see if the sights were straight and the mag fit and the general fit and finish. There were a few there that were pretty crooked. They actually had some already set up with the Tapco folding stocks. They look pretty cool but are kinda junky. I figure if it's not sturdy enough for military I don't want it. Especially after reading on here about a tapco stock breaking after the charging handle hit it. I'll definitely refinish the stock at some point.
Link Posted: 12/11/2005 10:08:48 AM EST
I love mine. The sights are somehat of a pain to use but the gun shoots well and is a blast to use. The furniture is not the best and can definately be improved but the AK is not meant to look pretty. It is a very basic combat weapon that will endure much abuse and shoot anything you put in it.
Link Posted: 12/11/2005 11:19:33 AM EST
[Last Edit: 12/11/2005 11:22:26 AM EST by scromer]
On the metal, you may want to try Oxpho-Blue from Brownells. It can be applied right over the existing finish and will darken up really well. I've refinished all of my AK's in Norrell's Molyresin. It takes an air brush to apply and requires baking to cure. The Romanian wood can finish up really nice. Here's my SAR-1 that looked like crap when I bought it:

Link Posted: 12/11/2005 8:38:53 PM EST
I refinished mine in Alumihyde 2 from brownells and am very happy with it. You must let it set for two weeks before reassemblingthough since it is not a bake on finsh. It will dry to the touch before two weeks of course but it will not harden all the way and is easy to scratch until it cures. They have it in several colors.
Link Posted: 12/12/2005 7:09:18 AM EST
[Last Edit: 12/12/2005 7:10:03 AM EST by Lxpony]
THey are blued not painted..

This one was blued by AKUSA.....

Link Posted: 12/12/2005 7:36:23 AM EST
For you folks who "painted" your AK and baked or waited - did you blast off the old finish OR apply OVER the existing finish? Also, how durable is your finish.

I know that with Gun Kote, you can apply over parkerization, but probably not over paint, and definitely not over blue. I just would not want to get a nice paint job that would just rubb off.

Link Posted: 12/12/2005 8:27:43 AM EST
I bought a SAR2 off a guy who painted it and baked the finish on. It is flaking off and has some "fish eye" blemishes... I am gonna have AKUSA strip it and blue it like it should be. I do not consider paint a viable finish option and detracts from the gun's originality
Link Posted: 12/12/2005 4:12:43 PM EST
Duracoat is wonderful stuff. I've never applied it, but have it on an SAR-2 and couldn't be happier. The safety doesn't even take the finish off!
Link Posted: 12/14/2005 8:56:58 AM EST
Put some plastic on there if you don't like the wood or don't want to refinish.

Krebs Custom sells a nice peep sight to replace that tinny rear sight.

Or get yourself a Kobra Red Dot from:
www. freedomoptics.com

I had Krebs refinish my SAR1 and and left my WASR10 as is for finish.
Link Posted: 12/26/2005 12:20:19 PM EST
Got my first AR, GPWASR 10. sling, bayonet lug, bayonet, sling, mag pouchs, 2:30 round mags. Flash Hider.

The laminated furniture is rock solid, but seems like no oil on it, like it matters on laminate.
Metal looks ok.

Would plain old MINWAX stain darken it up a bit? or should I sand it & use a liguid poly stain?

Top Top