Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
11/20/2019 5:07:11 PM
Posted: 11/2/2009 11:06:39 AM EST
Shot my KTR yesterday, and after every 3 or 4 shots my damn trigger pin would come loose and I would get a 2 round burst. Just running a fix by you guys. Trigger pin retaining plate? Seems like a no brainer.
Link Posted: 11/2/2009 11:33:03 AM EST
Trigger Pin Retaining Plate should fix it. Is there any E-Clips on it or anything right now?
Link Posted: 11/2/2009 1:31:08 PM EST
Originally Posted By Mauritius:
Shot my KTR yesterday, and after every 3 or 4 shots my damn trigger pin would come loose and I would get a 2 round burst. Just running a fix by you guys. Trigger pin retaining plate? Seems like a no brainer.


That would be a negatron.
Link Posted: 11/4/2009 9:15:06 AM EST
I would order a retaining plate from one of the online sources. Clips will do and are easy to find at the hardware store.

Link Posted: 11/4/2009 11:21:37 AM EST
[Last Edit: 11/4/2009 11:22:08 AM EST by sporter]
If your pins are walking they are probably worn. I would not doubt if the holes egged a bit as well.

Get new pins (Kvar has them); install retainer plate and you should be good to go.

Keep the trigger and hammer pin lubed up with grease in the future to prevent galling or future wear.
Link Posted: 11/4/2009 11:44:15 AM EST
Tapco L wire, will equall less play in the axis pin than a retaining plate, installs the same way and is 1/3rd the price.
Top Top