Member Login
Member Login
Member Login
|
Posted: 12/4/2020 7:39:14 AM EST
Quote History Originally Posted By Finslayer83: Showed up today https://www.AR15.Com/media/mediaFiles/164007/7CF727AF-C7B3-4849-ACB8-C0F846E219A1-1713247.jpg 
|
|
|
|
FL, USA
|
Posted: 12/4/2020 9:54:37 AM EST
Quote History Originally Posted By nictra: 2 of those rifles are too long....just sayin Or is one rifle too short? I'm partial to velocity. I better go back to hiding, I'll get mobbed for liking 16" barrels more than short barrels. 
|
|
|
|
Posted: 12/4/2020 12:12:16 PM EST
Quote History Originally Posted By HWI: Or is one rifle too short? I'm partial to velocity. I better go back to hiding, I'll get mobbed for liking 16" barrels more than short barrels. Quote HistoryOriginally Posted By HWI: Originally Posted By nictra: 2 of those rifles are too long....just sayin Or is one rifle too short? I'm partial to velocity. I better go back to hiding, I'll get mobbed for liking 16" barrels more than short barrels. 12.5" is the "ideal short length" for me in both 5.56 and 5.45. I see no real issues with them in the 500y envelope, enough velocity to do things and with the proper round it's not a big issue. The FPS drop from 14.5>12.5 is not that bad actually. I'm going to get 500 rounds through this then determine if I cut to 12.5-13" and stamp or 14.5 and pin on a YHM mount. At this juncture in time I think the latter option will be my path forward. Most likely add the KNS piston as well. The handguard sucks, been waiting on a MI rail or RS rail to become available (started looking a month ago) as I don't like this one. That was known before purchase and I planned already to replace. Should have a LaRue LT661 mount arriving today/tomorrow and will toss a H1 on it and call it a day. Would like to get a OG galil stock but they seem to be sold out due to plug and play swap with the Ace. Really like the factory stock so no complaints there. hope to hit the range Sunday. |
|
|
|
|
Posted: 12/4/2020 4:39:12 PM EST
[Last Edit: 12/4/2020 4:39:41 PM EST by 556sniper]
Walked into my LGS and saw it staring at me so I had to have it! After lurking forever I finally decided to get a can for my AK104 clone. I know its not the quietest can however its good enough for my purpose plus the PBS-1 looks badass. Now the wait begins!!!!
 
|
|
|
|
|
Posted: 12/4/2020 7:42:47 PM EST
Quote History Originally Posted By 556sniper: Walked into my LGS and saw it staring at me so I had to have it! After lurking forever I finally decided to get a can for my AK104 clone. I know its not the quietest can however its good enough for my purpose plus the PBS-1 looks badass. Now the wait begins!!!!https://i.imgur.com/bRsLvu2.jpghttps://i.imgur.com/HxZkr5M.jpg Excellent! |
|
|
|
FRA
|
Posted: 12/6/2020 7:28:50 AM EST
[Last Edit: 12/6/2020 8:22:31 AM EST by Vlad75]
 " />It's time to show mine, a pre2018europeanban original 100% military Zastava M92 (2013 issue)with TWS cover, and KNS piston, Ase ultra suppressor from Finland. Best AK SBR ever. Works like real military weapon with autosear attached and only castrated disconnector to make it legally semi auto. I bought mine a month before the ban.  " />
|
|
|
|
Posted: 12/6/2020 8:28:06 AM EST
Quote History Originally Posted By Vlad75: https://zupimages.net/up/20/49/3wfi.jpg" target="_blank">https://zupimages.net/up/20/49/3wfi.jpg It's time to show mine, a pre2018europeanban original 100% military Zastava M92 (2013 issue)with TWS cover, and KNS piston, Ase ultra suppressor from Finland. Best AK SBR ever. Works like real military weapon with autosear attached and only castrated disconnector to make it legally semi auto. I bought mine a month before the ban. https://zupimages.net/up/20/49/ht4l.jpg" target="_blank">https://zupimages.net/up/20/49/ht4l.jpg nice! |
|
|
|
FRA
|
Posted: 12/6/2020 8:58:44 AM EST
Thank you. Where a lot of anti weapon propaganda in Europe and European commision try to limit more and more a legislation making it harder to possess a military style weapons. We don't have something like your second amendment to protect us. But strangely some limitations are more restrictives in the USA than in Europe. For exemple the suppressors. They are no more restricted at all and buying them does not require any permit nor licence.
|
|
|
FRA
|
Posted: 12/6/2020 9:00:08 AM EST
[Last Edit: 12/6/2020 9:23:25 AM EST by Vlad75]
My three holes Saiga 9. Looks alike american made Ak 9mm, but with an auto sear
 [/url][/img]Strangely is sold as semi automatic civil use only rifle, also with shortened disconnector I bought a 9mm suppressor for 375 caliber hunting rifle and use it at three rifles at the same time. My Zastava M92, Saiga9 and SVD 308 Tigr. It works perfectly with all of them |
|
|
|
Posted: 12/21/2020 10:30:23 AM EST
Quote History Originally Posted By Vlad75: My three holes Saiga 9. Looks alike american made Ak 9mm, but with an auto sear https://zupimages.net/up/20/49/4qg6.jpg[/url][/url] Strangely is sold as semi automatic civil use only rifle, also with shortened disconnector I bought a 9mm suppressor for 375 caliber hunting rifle and use it at three rifles at the same time. My Zastava M92, Saiga9 and SVD 308 Tigr. It works perfectly with all of them That's way cool - thanks for sharing. Ugh - what I'd give to own an SVD...I envy you. |
|
|
|
|
Posted: 1/9/2021 3:25:35 AM EST
Going green and I like it compared to the all black before. Magpul doesn’t seem to make the MOE+ grip in OD anymore unfortunately
 Attached File Attached File Attached File |
|
|
|
|
Posted: 1/9/2021 6:03:26 AM EST
Anyone have a Kalashnikov USA KP-9 and run it suppressed?
Wondering which suppressor to throw on mine. |
|
|
|
|
Posted: 1/9/2021 8:45:53 AM EST
[Last Edit: 1/30/2021 5:57:12 PM EST by TX-Zen]
I'm your huckleberry
Gost M in long config for maximum suppression, but I also like the Omega 9K  |
|
|
|
|
Posted: 1/9/2021 1:56:35 PM EST
Quote History Originally Posted By TX-Zen: I'm your huckleberry Gost M in long config for maximum suppression, but I also like the Omega 9K https://www.AR15.Com/media/mediaFiles/73202/20200731_191122-1528113.jpg Ooo I dig that set up. I have to say, this KP-9 is built really well. I'm impressed. |
|
|
|
|
Posted: 1/9/2021 3:07:43 PM EST
Have you grouped yours yet? Mine gets 1 to 1.5 inch groups at 50 yards
https://russianoptics.net/ZenRifles-KR-9.html |
|
|
|
|
Posted: 1/9/2021 3:12:17 PM EST
Quote History Originally Posted By TX-Zen: Have you grouped yours yet? Mine gets 1 to 1.5 inch groups at 50 yards https://russianoptics.net/ZenRifles-KR-9.html Haven't taken it out yet, but that's really awesome. This thing looks so good - I mean, obviously looks aren't everything, but this is one really badass little AK variant. Can already tell this is going to be fun to shoot. I have one of those Russian Delta Tek Vityaz flash hiders in the mail - curious to see how well it works when it arrives. |
|
|
|
|
Posted: 1/10/2021 9:19:47 AM EST
Quote History Originally Posted By TX-Zen: I don't have experience with the YHM muzzle device, but yes, more or less it should tighten down against the FSB. It's possible that it may not screw down all the way to the FSB and that would be ok too, as long as it gets extremely tight. Read the manual if they include one. Most suppressor muzzle devices have shims to help with indexing and often have instructions on how it works, so read that You'll want to loc-tite the muzzle device in place to be sure it doesn't walk during shooting and of course do a good rod check or 5 to be sure it's concentric I haven't been paying enough attention to the GF3 to know if they have concentricity problems Quote HistoryOriginally Posted By TX-Zen: Originally Posted By JerDerv: Hey guys, I have a couple YHM cans and I noticed YHM sells a 14x1LH muzzle device. I have a 16" PSA GB2, would i just tighten the YHM device right up against the front sight? I don't have experience with the YHM muzzle device, but yes, more or less it should tighten down against the FSB. It's possible that it may not screw down all the way to the FSB and that would be ok too, as long as it gets extremely tight. Read the manual if they include one. Most suppressor muzzle devices have shims to help with indexing and often have instructions on how it works, so read that You'll want to loc-tite the muzzle device in place to be sure it doesn't walk during shooting and of course do a good rod check or 5 to be sure it's concentric Originally Posted By Bandhunter: Interested in answer. There is a used PSA GF3 that has a kns piston already installed I'm thinking about snagging. Are the threads concentric on these? I have a resonator k and a Rex mg7 .358 that would be used with yhm muzzle device. Edit:rifle sold quick missed out. I haven't been paying enough attention to the GF3 to know if they have concentricity problems My GF3 is concentric and lines up perfectly with a drill rod, ASR FH and Saker |
|
|
|
|
Posted: 1/15/2021 5:55:21 PM EST
[Last Edit: 1/15/2021 6:09:46 PM EST by sv30cal]
   
|
|
|
|
USA
|
Posted: 1/15/2021 7:43:18 PM EST
[Last Edit: 1/15/2021 11:52:19 PM EST by judge_joe_brown]
What KNS piston are you guys using on the suppressed 106URs.. They have a lot of different options. There is the 5.45 Bulgarian Krink (AGP-A-19) I’m thinking this is the one but just wanted to see which ones everyone was using.
|
|
|
FL, USA
|
Posted: 1/19/2021 10:51:31 AM EST
Quote History Originally Posted By judge_joe_brown: What KNS piston are you guys using on the suppressed 106URs.. They have a lot of different options. There is the 5.45 Bulgarian Krink (AGP-A-19) I’m thinking this is the one but just wanted to see which ones everyone was using. I would recommend measuring rather than going by the word of a rando on a forum. |
|
|
|
Posted: 2/4/2021 7:16:06 PM EST
Ordered a Dead Air Wolfman for my KP-9.
The wait has begun... |
|
|
|
|
Posted: 2/5/2021 9:44:12 AM EST
[Last Edit: 2/5/2021 9:45:32 AM EST by duhflushtech]
Quote HistoryOriginally Posted By judge_joe_brown: What KNS piston are you guys using on the suppressed 106URs.. They have a lot of different options. There is the 5.45 Bulgarian Krink (AGP-A-19) I’m thinking this is the one but just wanted to see which ones everyone was using. @judge_joe_brown My 106U uses the 7.62 krink piston (AGP-A-3), and every other 106U owner who's installed a KNS piston I've talked to has the same experience. Specifically, I got the AGP-A-3S, which has the smaller gas hole in front. They have another version with a larger gas hole in the front for larger calibers. The bulgarian 5.45 one is for sure the wrong size. I can say that for a fact because I was dumb enough to buy it myself, then realize I picked up the wrong one. The 106 series uses a lot of 7.62 spec parts like the fatter bolt tail, and apparently the gas piston sizing is also 7.62. That said, you are best off just measuring it yourself to be sure, like the poster below you said. When I measured mine the A-3 one was the correct size. |
|
|
|
|
Posted: 2/5/2021 12:33:10 PM EST
[Last Edit: 2/5/2021 12:40:44 PM EST by duhflushtech]
I was about to grab a 24mm to 1/2 adapter to suppress my 106U with a Resonator K, but then I remembered that the krink barrel is like 8.25 or whatever, and the Resonator has a length restriction of 10.5".
Given that the resonator is a 30 cal suppressor I'd think it should be OK, but I'm a little worried. I doubt it would pop the can but it will be really hard on the baffle. I was thinking of getting a wolverine at some point so maybe I should just wait for that instead. Are any of you guys running a supressor with a nominal 10.5" limit on a krink, and if so can you say if there were any issues? |
|
|
|
FL, USA
|
Posted: 2/5/2021 4:12:13 PM EST
[Last Edit: 2/5/2021 5:31:16 PM EST by ZhouBaiDin]
My AK hosts.
 edit- anyone know why the site is converting my img tags into a url link to the image? The preview always looks correct but when you view the thread, all you see are the URL of the image to click on. |
|
|
FL, USA
|
Posted: 2/5/2021 4:13:31 PM EST
7.62x39 basically the same thing as 300 BLK. If it can take 10.5" 7.62x51, there is no way a krink length barrel will hurt it.
|
|
|
|
Posted: 2/6/2021 3:32:21 AM EST
Quote History Originally Posted By ZhouBaiDin: 7.62x39 basically the same thing as 300 BLK. If it can take 10.5" 7.62x51, there is no way a krink length barrel will hurt it. Yeah but my krinks are 5.45 and 5.56 |
|
|
|
TX, USA
|
Posted: 2/11/2021 1:10:16 PM EST
|
|
|
AR15.COM is the world’s largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2021 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
