Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 5/6/2004 11:15:47 AM EST
Firing today the trigger stopped resetting. It's an RSA trigger group. Only 80 rounds or less through the gun. I thought AK's are indestructible. It got really grity and hard, and then to reset it I have to push the trigger forward again with my finger. Reset spring? what?
Link Posted: 5/6/2004 11:36:14 AM EST
Sounds like the disconector adjustment needs tweeking. The RSA FCG is an awesome unit, but generally does need some inital adjustments. If you didn't get instructions with your SEAK, go to redstararms.com they have detailed "how to" on their FCG's
Link Posted: 5/6/2004 2:32:23 PM EST
Contact Mike at ORF immediately and tell him what the trigger is doing. Pics would be great if you can take them....


KF
Link Posted: 5/6/2004 2:47:59 PM EST

Originally Posted By krinkfreak:
Contact Mike at ORF immediately and tell him what the trigger is doing. Pics would be great if you can take them....


KF



What's his email? Couldn't find it on the ORF website. There's really nothing to take pics of, although I have not opened the gun up yet.
Link Posted: 5/6/2004 2:49:46 PM EST
you can email him at:

me223@ar15.com

Take a look at the disconnector and see if it is intact.

KF
Link Posted: 5/6/2004 2:55:17 PM EST
Got it. Didn't realize that Me223 was Mike. Did you forward him my email KF?
Link Posted: 5/7/2004 4:17:18 AM EST
Could be that one of the hammer spring legs has slipped off of one of the trigger arms. That will cause failure for the trigger to reset, and if the spring leg is rubbing against the trigger arm it will feel "gritty."

But it's most likely the RSA FCG has come out of adjustment. I'd recommend cleaning the threads with acetone and using blue Loctite. You must clean the threads as the Loctite will not work well on oily threads and the screws WILL back out.

Best,

Noah
Link Posted: 5/7/2004 5:49:13 AM EST
"Could be that one of the hammer spring legs has slipped off of one of the trigger arms. That will cause failure for the trigger to reset, and if the spring leg is rubbing against the trigger arm it will feel "gritty."

Same thing with the Gordon set on my AMD63.

Top Top