Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/15/2004 6:34:25 AM EST
Bought a SAR-1 several months ago which came with a romanian wire side-folding stock welded in the open position.

Was wondering if anyone here has tried to grind out or break the weld in order to make the folder fold and if so can you give me some pointers?

Or is it perhaps not worth the time and I should just go buy a $35 new folding stock?

Thanks folks!
Link Posted: 9/15/2004 6:54:01 AM EST
Its a pretty easy fix,you can brace the stock,knock out the pin holding the release button and hit the stock with a hammer and the weld will break.After that,all you have to do is clean off the weld with a dremil and file.
Link Posted: 9/28/2004 9:16:29 AM EST

Originally Posted By JOHNO:
Its a pretty easy fix,you can brace the stock,knock out the pin holding the release button and hit the stock with a hammer and the weld will break.After that,all you have to do is clean off the weld with a dremil and file.



Have you actually tried this>

I wasn't able to do it without risking damaging the thing.

GRRR
Top Top