Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 3/29/2006 7:23:00 PM EDT
I just bought a side folding wire stock for my MAK-90. The stock did not come with mounting screws. Does anyone have an idea were I can get the proper screws?

TIA
Link Posted: 3/30/2006 3:09:10 AM EDT
Link Posted: 3/30/2006 8:13:17 AM EDT
[Last Edit: 3/30/2006 8:16:38 AM EDT by Mak]
The screws are a metric 5mm. Many vendors such as TAPCO sold these sidefolders with screws that they said were original. I got some with a sidefolder but had several that did not included screws. I took the screws from TAPCO and went to ACE hardware and found the exact same screws with the same markings there for about $.10 each.


I have never known a Romanian sidefolder to properly fit a MAK-90. You with have to grind the sides of the sidefolder mounting block to fit into the Chinese rifles thicker receiver. When you get it in, you will only be able to mount it with one screw instead of two as the holes are not going to line up correctly in the sidefolder with the tang on the receiver.
Link Posted: 4/1/2006 9:21:33 AM EDT
http://www.aa-ok.com/akparts.html
Link Posted: 4/1/2006 10:18:23 AM EDT
Link Posted: 4/1/2006 11:35:07 AM EDT

Originally Posted By Mak:
The screws are a metric 5mm. Many vendors such as TAPCO sold these sidefolders with screws that they said were original. I got some with a sidefolder but had several that did not included screws. I took the screws from TAPCO and went to ACE hardware and found the exact same screws with the same markings there for about $.10 each.


I have never known a Romanian sidefolder to properly fit a MAK-90. You with have to grind the sides of the sidefolder mounting block to fit into the Chinese rifles thicker receiver. When you get it in, you will only be able to mount it with one screw instead of two as the holes are not going to line up correctly in the sidefolder with the tang on the receiver.



Yes, your right only one screw but it does work. My brother had to fit one on his reciever, and it was fine.
Top Top