Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page AK-47 » Krinkov
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/14/2006 6:33:48 PM EST
I want to replace my top cover for various reasons, but it isn't obvious on how to remove the old cover. Do I drill out that pin holding it in? Is it a compression fit?
Link Posted: 2/15/2006 5:45:40 AM EST
Link Posted: 2/15/2006 5:49:47 AM EST

Originally Posted By terma-nator:

Yup to what? Drill out the pin or a compression fit?

Link Posted: 2/15/2006 9:46:18 PM EST
[Last Edit: 2/15/2006 9:46:30 PM EST by Beltfedleadhead]
yeah, I'd say so...
Link Posted: 2/16/2006 4:21:01 AM EST
yall are killing me...
Link Posted: 2/16/2006 4:26:14 AM EST
Link Posted: 2/16/2006 6:04:03 AM EST
Ok, now I get it
Link Posted: 2/16/2006 5:07:38 PM EST
If you want to sell that old top cover let me know, I need the hinge piece from the front of one for a custom cover I am making. If you dont want to use a pressed pin to hold your new one in you can do what I did. I used a pin of the correct diameter and grooved the ends for e clips. This makes your cover easily removable.
Link Posted: 2/16/2006 5:30:33 PM EST
Good idea 1900 (too lazy to type it all out). And I will sell it to you when I get the new style top cover from KVAR. Lets take the rest of this to IM.
Link Posted: 2/17/2006 4:31:50 PM EST
Great, Let me know when your ready to sell. IM ok.
Link Posted: 2/25/2006 2:15:38 AM EST
its not press fit
the ends are crushed like the tg pin
most the time you can just punch it out
if not dont drill in more than 1/8 you dont want to open that hole
Page AK-47 » Krinkov
Top Top