Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/31/2003 3:21:16 PM EST
Ok, just got the RSA FCG and the retaining plate. With the retainer plate design you have to put the saftey lever in last. My problem is how do you get the saftey in with the disconnector in the way. Any help? Thanks.

Link Posted: 10/31/2003 3:26:40 PM EST
Push down on the front of the disconnector rotating the disc. forward should clear the saftey enough to get it in...
Link Posted: 10/31/2003 3:35:03 PM EST
nope, didn't work. and i backed the set-screw up so it wasn't interfering.
Link Posted: 10/31/2003 3:37:44 PM EST
The you probably will have to cut a notch in you safety bar, instruction to do this should be included with you trigger..

If not there is a pdf file on RSA's web site
Link Posted: 10/31/2003 3:43:52 PM EST
here is a link to the pdf:


The info is on page three
Link Posted: 10/31/2003 5:19:08 PM EST
[Last Edit: 10/31/2003 5:35:51 PM EST by KenR_RedStarArms]
Link Posted: 10/31/2003 5:23:20 PM EST
Top Top