Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Posted: 5/31/2008 9:54:24 AM EDT
Can I change the original stock to the triangular metal stock? How hard it is?

Does the fake PBS supressor fits?

If I want to SBR it do I have to open the gas port?

Does the krink 4 piece flash ider fits the 107UR?

Thanks in advance guys.
Link Posted: 5/31/2008 10:48:27 AM EDT
The stock change is easy.  There is a pin that you have to tap out, that is all.  If you fuck up the pin you may need a new one but I reused mine...

The 4 piece flash hider fits but you need to chop off the barrel first.  
Link Posted: 6/4/2008 6:07:54 PM EDT

Quoted:
The stock change is easy.    


Does the triangle stock, "click folded" the the stock stock does??
Link Posted: 6/4/2008 6:54:28 PM EDT

Quoted:
Does the triangle stock, "click folded" the the stock stock does??


yes
Link Posted: 6/4/2008 7:10:19 PM EDT
Link Posted: 6/5/2008 3:41:05 AM EDT
Assuming the original pin cannot be salvaged, which pin is used for the replacement stock, the 4.5mm or the 5.5mm?

Also, is this the stock needed?

Link Posted: 6/5/2008 6:17:31 AM EDT

Quoted:
Assuming the original pin cannot be salvaged, which pin is used for the replacement stock, the 4.5mm or the 5.5mm?

Also, is this the stock needed?



4.5mm

Yes... that's the stock you need, but you don't need all the hardware, just the stock.  They are about $50-$70.
Link Posted: 6/6/2008 5:48:56 AM EDT

Quoted:
easy to change stocks, takes 2 minutes, the 4piece brake fits great, you must open the gas block to 3mm, its not easy to get the gas black off, a press will be needed.   the triangle stock does lock open and closed

img151.imageshack.us/img151/8533/misc049bv4.jpg


Top Top