Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/6/2006 9:17:44 AM EST
I'm gonna remove the bluing with Brownells Steel White rust and blue remover. Does anyone know if it will hurt the bore (chrome lined Romy). The guy I talked to at Brownells wasn't sure. How do I plug the barrel if necessary?
Link Posted: 1/6/2006 8:13:04 PM EST
I wouldn't worry about it.

but if you are worried, seal it with some candle wax. it an be removed with boiling water afterwards.

like... stuff a little paper in the barrel about 1/4" and drip some wax in there, repeat on the other openings, that should seal it good, and be easy to remove.
Link Posted: 1/6/2006 11:36:07 PM EST
dont forget about the gas block, it has a hole too
Link Posted: 1/7/2006 3:28:14 AM EST
The traditional way is awooden dowel rod of proper size driven in with a hammer
Link Posted: 1/7/2006 10:32:21 AM EST
I have used chewing gum successfully.
Link Posted: 1/7/2006 7:33:10 PM EST
There is always the old school way, put a cork in it....
Link Posted: 1/9/2006 9:28:26 AM EST
Yeah. I would reccomend that to anyone!
Link Posted: 1/9/2006 11:53:27 AM EST
I use foam earplugs
Top Top