Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/5/2006 6:11:26 PM EST
I have been racking my brain trying to get the thing off my Vector. I plan to have it durakoted Black. But I want to take it apart to do so.

Any help is greatly appreciated.

Jake
Link Posted: 1/5/2006 6:14:40 PM EST
Its got 2 pins that need to be punched out before you can take it off.
Link Posted: 1/5/2006 6:15:04 PM EST
Gotta knock the pins out





Here is a step by step too.

Underfolder assembly
Link Posted: 1/5/2006 6:16:12 PM EST

Originally Posted By StreetTrends:
Its got 2 pins that need to be punched out before you can take it off.




3 on an AKM
Link Posted: 1/5/2006 6:24:41 PM EST
Your receiver may have to have a hole drilled in the bottom to allow the pin to be pushed out.
Link Posted: 1/5/2006 7:03:44 PM EST

Originally Posted By TheRealSundance:
Gotta knock the pins out

home.earthlink.net/~mwsjb/underfolderstock.jpg



Here is a step by step too.

Underfolder assembly



Thanks, Great link!!

I am now on the path to figuring out my underfolder problems. To start off with, I'm missing part #6 and the pin going through part #3 is only halfway in.

MFer
Link Posted: 1/5/2006 7:09:29 PM EST

Originally Posted By Maroonfeather:

I am now on the path to figuring out my underfolder problems. To start off with, I'm missing part #6 and the pin going through part #3 is only halfway in.

MFer



You may try a different abbreviation for your name with less negative connotations...
Link Posted: 1/5/2006 7:16:54 PM EST
Link Posted: 1/5/2006 7:19:16 PM EST
[Last Edit: 1/5/2006 7:19:35 PM EST by robpiat]
I only have a UF that I built on a flat...Does your vector have a service hole under the pistol grip to push the pin(s) through?

I need to remove mine to refinish and will have to drill.
Link Posted: 1/5/2006 7:37:43 PM EST
Yeah, forgot about that 3rd pin. Once you start knocking them out it comes apart pretty easy.
Link Posted: 1/6/2006 3:21:49 AM EST

Originally Posted By robpiat:
I only have a UF that I built on a flat...Does your vector have a service hole under the pistol grip to push the pin(s) through?

I need to remove mine to refinish and will have to drill.



I'll have to check the service hold under the PG. But I'm now thinking That I will have to drill a hole to get the last pin out.
Link Posted: 1/6/2006 3:22:22 AM EST
Great info guys! Thanks for all the help.
Link Posted: 1/6/2006 3:26:29 AM EST
Link Posted: 1/6/2006 2:56:23 PM EST
Here you go....just copy and paste is link. http://home.earthlink.net/~mwsjb/AKBuild3.htm
Link Posted: 1/6/2006 3:36:19 PM EST

Originally Posted By HeavilyArmed1:
Here you go....just copy and paste is link. http://home.earthlink.net/~mwsjb/AKBuild3.htm


I'm getting "Page not Found"
Link Posted: 1/31/2006 5:18:36 AM EST
try this

http://home.earthlink.net/~mwsjb/AKbuild3.htm
Top Top