Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 3/15/2005 11:26:12 AM EST
Anyone bought these kits and can give feedback?

I have a few extra receiver flats and am looking for a cheap rifle variant build.

thanks
Link Posted: 3/15/2005 11:43:35 AM EST
I'm no expert by any means, but I'm pretty sure those are milled reciever kits.
Link Posted: 3/15/2005 11:50:05 AM EST
If you want a cheap build then hurry up and go to equipment exchange. There is an AMD-65 kit that needs a trunnion hole repaired, but the person is including US parts, and an extended muzzle brake for $112 shipped. You won't get one cheaper than that.
Link Posted: 3/15/2005 11:51:09 AM EST
Right, barrel threaded and kit does not include front or rear trunions...

But if they are any good, and the barrel can be turned down and pressed into another trunion, might be fun...
Link Posted: 3/15/2005 11:56:39 AM EST
Yes that's a great deal...for a screw build. It would be a little more difficult to fix it up for a rivet build since the holes are drilled out.

But I want a full size ak, as I have a few of those AMD kits in process already!
Link Posted: 3/15/2005 2:39:41 PM EST
[Last Edit: 3/15/2005 2:40:22 PM EST by 0100010]
I had one for about a week. The barrels are NOT threaded on the chamber end. The barrels are however chinese, and therefore a 19mm trunnion is required to mount it in. If you can find a chinese 19mm trunnion for less than the entire MAK 90 kit, then you are a better researcher than I.......

Other than that, the kits are in excellent condition and have all matching serial numbers.
Link Posted: 3/16/2005 6:24:21 AM EST

Originally Posted By 0100010:
I had one for about a week. The barrels are NOT threaded on the chamber end. The barrels are however chinese, and therefore a 19mm trunnion is required to mount it in. If you can find a chinese 19mm trunnion for less than the entire MAK 90 kit, then you are a better researcher than I.......

Other than that, the kits are in excellent condition and have all matching serial numbers.



That would be the deciding point...thanks!

of course I could turn it down and make a sleeve to build it up to 23 mm....
Top Top