Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 9/28/2005 5:45:21 PM EDT
What else could I possibly try? Is it possible Chris assembled it with lock-tite? It just will not budge no matter how hard I try, how hard I hit a hammer against a wrench into the base in the receiver. I need help.
Link Posted: 9/28/2005 6:06:35 PM EDT
I've had better luck wiggling the stock side to side as compared to hammering it out from the inside. Slow at first, but it eventually comes out and less potential for damage.
Link Posted: 9/28/2005 6:11:34 PM EDT
Link Posted: 9/28/2005 6:20:24 PM EDT
[Last Edit: 9/28/2005 6:22:45 PM EDT by OldTroop]
And again...lay the gun across your lap....smack the stock with the palm of your hand or a big rubber mallet...after each hit turn it over and do it again...keep it up untill you can pull the stock out. Your gonna get the same answers as the thread you started a few days ago about the same thing.
Link Posted: 9/28/2005 7:33:01 PM EDT


Link Posted: 9/29/2005 5:23:21 AM EDT
Dont forget to let out a barrage of curse words...It always help's me..
Link Posted: 9/29/2005 6:22:00 AM EDT
This always works for me.

Field strip the rifle (remove top cover, bolt, etc). Hold the stock in your hand with muzzle pointing down to the floor. Take a rubber mallet and pound on the rear site block. Works everytime. Just make sure there is a pillow below the rifle so you don't mess up the crown when it falls.


Link Posted: 9/29/2005 6:44:21 AM EDT
Link Posted: 9/29/2005 6:48:54 AM EDT
Thanks ALL! Got the damn sumbitch out!
Link Posted: 9/29/2005 11:25:47 AM EDT
See....
Link Posted: 9/29/2005 11:40:59 AM EDT
[Last Edit: 9/29/2005 11:41:24 AM EDT by MauserMark]

Originally Posted By Jicky:
See....



yeah had to shut our bedroom door, as a slew of profanity erupted towards the end, and it seemed slide out quicker once that began.


and yes, I know you can make that into a toilet joke.
Top Top