Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Site Notices
Posted: 10/9/2005 11:59:00 PM EDT
What is the correct reciever dimension for a stamped AK reciever?
I want to make a flat bending jig but need to know what size.
I believe the interior dimension between the side walls is 1.25" but
what about interior dimension at the top rail at the front and rear of the reciever, and over all length? Thanks for help

Link Posted: 10/10/2005 5:27:31 AM EDT
When I built a bending jig I measured the receiver stubs to get the height dimension and checked that against a WASR. If you can't do that for some reason post and I'll measure mine again. OAL is the length of the flat.
Link Posted: 10/10/2005 7:27:27 AM EDT
This link has a link to a PDF that has all the measurements you will need.
If you can't see the link or don't have access, just register and you will gain access (free and easy)

www.gunco.net/forums/showthread.php?t=65
Link Posted: 10/10/2005 12:26:53 PM EDT
tag
Link Posted: 10/10/2005 6:39:04 PM EDT
Perfect!!!!!!!!!! Thanks alot
Top Top