Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 9/27/2004 4:34:34 PM EST
I am trying to install my brake, but.... I took out the front, front sight post pin out to put the spring and plunger in; however it will not go in all the way. Do I have to take out both sight post pins? What do I do? Thanks.
Link Posted: 9/27/2004 4:49:49 PM EST
[Last Edit: 9/27/2004 4:52:38 PM EST by Mak]
You just have to take the front one out. Are you putting the detent pin in the right way . When you depress the pin you should be able to look through the hole and see that the pin will go through. I believe the notch in the detent pin should face up.



If you stuck it in like in the picture you have it backwards, the small end goes in the hole depressing the spring.
Link Posted: 9/27/2004 5:09:17 PM EST
thats what I am doing......it is not working. Maybe there is a spring already jammed i there, but it doesnt feel like it.
Top Top