Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page AK-47 » Russian
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/9/2003 4:31:14 AM EST
[Last Edit: 8/9/2003 4:40:20 AM EST by GaryM]
And my SAR-2.

And a special thanks to MRW and all the others here that contributed to the Saige conversion thread, you guys made it possible.

Editted to add;
BTW, I was able to keep the bolt hold open device. Since the new location for it would leave a nasty blister on the trigger finger I did a bit of measuring and decided a bit of dremel work could fix it. Cut about 1/8" shorter with it tapering to the front. When engaged it actually lies within the reciever, when released it protrudes about 3/16". The angled cut allows for the protruding part to be to the rear and even with reciever body at the front. This does a very good job of keeping it away from your finger. Let it be known that getting that hold open spring in place is a son of a bitch! Took three hands to do it.
Link Posted: 8/9/2003 5:20:03 PM EST
welcome to the brotherhood of the Saiga converts!
Link Posted: 8/10/2003 6:21:05 AM EST
[Last Edit: 8/10/2003 6:21:22 AM EST by Mbsk01]
WOW, despite the non-standard handguard, I really like the way that looks. As if I needed any more ideas on ways to spend my $$.
Page AK-47 » Russian
Top Top